RE: [OT] internal SCSI-I terminators?

["Phil Harris" <phil@xxxxxxxxxxx>]

Usually SCSI-I devices (well, all the ones I used to have anyway) were
fitted with three resistor packs which could be either physically removed
if
not necessary or disabled with a link...

Phil

> -----Original Message-----
> From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx]
> On Behalf Of Paul Gale
> Sent: 29 June 2006 10:39
> To: ukha_d@xxxxxxx
> Subject: [ukha_d] [OT] internal SCSI-I terminators?
>
> I'm trying to connect a DLT drive internally - 50 Pin
> connector. I thought I had a cable in the loft from years ago
> but can't find it. Maplin have one though. I was also
> wondering if internal SCSI-I devices need a terminator on the
> end of the cable? The drive supplies TERMPWR and there isn't
> any mention of a terminator needed in the manual (there is
> for an external device though).
>
> Thanks,
>
> Paul.
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------ Yahoo! Groups Sponsor
> --------------------~--> Something is new at Yahoo! Groups.
> Check out the enhanced email design.
> http://us.click.yahoo.com/SISQkA/gOaOAA/yQLSAA/IBOolB/TM
> --------------------------------------------------------------
> ------~->
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>