[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Re: Fw: Stair LEDs
Neil Frost wrote:
> Could you not use a VIOM or NetIOM for that sort of thing?
>
Probably, a Netiom is not standalone (it can't apply logic/timers to its
inputs /outputs to control its outputs). However a Viom is appropriately
capable and you could set a timer to run after each output change to
trigger the next output , inputs could trigger direction. (would have
to double check this was possible). There are 8 timers 16 inputs, and 16
outputs. The only issue here would be the ability to drive the LED's
based on current consumption, you may need to buy the add on relay
boards too which would solve this. A Netiom could be used with a
software application running on a PC - or a xAP Netiom with HomeSeer and
a script.
Kevin
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|