Plasma cabling requirement

["Dean Barrett" <dean@xxxxxxxxx>]

I've just been asked to pre-wire some houses for wall mounted Plasma's.

This is usually carried out for them by an AV guy - he wants ducts etc.,
and
they dont, as they have to batten walls out to cater for his 32mm ducts.

What sensible cabling requirement would be acceptable for a plasma - i'm
thinking 1 x CT100, 1 x Power & 1 x Multicore Coax thing - dont know
technical term, but it has five/six small colour coded coax's in it which i
believe are used for the component signals if a seperate box is used for
Plasma.

I havent look at HD at all, and dont know if there's a cable (no plugs)
that
could be built in wall and plastered over.

Any suggestions appreciated.

This is a volume builder doing a site of 50 units, so nothing fancy is
allowed.





Dean.




Talk for free - skype me  <skype:dean.rolec?call> Call me!

Try our amazing lighting demonstration online now, and watch in realtime
via
our webcam. Click below and follow the CBus links.
<http://www.rolec.net/> www.rolec.net
dean@xxxxxxx
Tel: 01908-210677
Fax: 01908-210678

The information in this internet E-mail is confidential and is intended
solely for the addressee. Access, copying or re-use of information in it by
anyone else is unauthorised. Any views or opinions presented are solely
those of the author and do not necessarily represent those of The Rolec
Group or any of its affiliates. If you are not the intended recipient
please
contact wrongmail@xxxxxxx




[Non-text portions of this message have been removed]