[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Re: Rabbit 2000
- Subject: Re: Rabbit 2000
- From: "patrick_o_matic" <patrick@xxxxxxxxxxxx>
- Date: Fri, 31 Mar 2006 13:28:14 -0000
> What I don=EF=BF=BDt understand is that I have used a pc serial port
to
generate pulses by switching on DTR every 1000ms, I the set a loop to
run X times and rabbit sees then all, I have even set this to 100ms
and rabbit still runs ok. I hope that the de-coupling caps with have
solved the issues. I'll run another test and see what happens.
>=20
That's encouraging then, it sounds like your code is OK, and the
pulses look nice and clean too. How are you powering the pulse
conditioning circuit? A bit obvious, but are the grounds common (are
you using the same power supply for the rabbit and the pulse conditioner?)
Patrick
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|