Re: UPS Position In Rack / Cabinet

["Martyn Wendon" <martynwendon@xxxxxxxxxxx>]

> What VA rating UPS are you using?

A 1500 and a 1000 will be going in.

I've got some 1-wire sensors ready to go in as well :) I think I'm going to
do one at the bottom, one at the top, one on the air intake and one on the
exhaust.  Probably a bit overkill, but should give a good overall picture
of
the situation once everything is in and running.

Martyn

----- Original Message -----
From: "Tim Hawes" <timsyahoo@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: Monday, May 08, 2006 8:10 PM
Subject: Re: [ukha_d] UPS Position In Rack / Cabinet


> I'd say put it/them at the bottom because of the weight. However in
> other cabinets I have seen active equipment put at the top, because of
> the heat issue. Since you're actively ventilating your cabinet I
> wouldn't be too worried - stick a couple of Dallas 1-wire temp sensors
> in there if you are concerned but I'd have thought you'd be ok.
>
> What VA rating UPS are you using?
>
> Tim.
>

Send instant messages to your online friends http://uk.messenger.yahoo.com