[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Connecting a Wincor Nixdorf to a PC
- Subject: Connecting a Wincor Nixdorf to a PC
- From: "osbit1" <kevin.page@xxxxxxxxxxx>
- Date: Mon, 20 Nov 2006 12:15:35 -0000
This is my first post on here so hi all !
I've managed to get hold of a Wincor Nixdorf BA72A LCD touch screen
and want to connect it up to a PC as a front end.
The problem is that it has what looks like a propriotary 40-pin MDR
connector on it and I'm not sure how I'm going to do it.
I found a copy of the manual at http://www.wincor-
nixdorf.com/internet/com/Services/Support/TechnicalSupport/POSSystems
/Manuals/BAxx/BA72A-2,templateId=blob.jsp,property=Data.pdf
I've not been able to determine if there is a PC card that you can
buy that will allow me to connect this screen directlry or if I
would have to try and do something fancy to get it working (if
possible).
If anyone's got any ideas, I'd appreciated it.
Cheers
Kev
** Sponsored by http://www.BERBLE.com **
all the Cool Stuff, in one Place
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|