[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
X10 LW12 in wall dimmer
- Subject: X10 LW12 in wall dimmer
- From: "Campbell Macdonald" <c.macd@xxxxxxxxxxxxxx>
- Date: Fri, 6 Oct 2006 23:55:30 +0100
I 've just fitted 2 of these into switch back boxes, behind the
switch....one on a metal box, the other on a plastic box,
Whilst fitting I touched the metal plate on the LW12 and noticed it was
quite hot....
Does anyone know what sort of temperature this palte can get to and is
there
any risk especially with the plastic back boxes.
any advice appreciated
Campbell
** Sponsored by http://www.BERBLE.com **
all the Cool Stuff, in one Place
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|