RE: C-bus enclosure

["Paul Gordon" <paul@xxxxxxxxxxxxxxxxxxxxx>]

Colin,

What I've done is to use a double-pole MCB per enclosure as a
"master"
breaker for the box to isolate the whole enclosure for when I want to
take the cover off and work on the wiring inside the box etc.

In addition to that I have a lower rated MCB on each output channel from
the CBUS units, so in a typical enclosure with a 4-channel CBUS dimmer I
would have 5 MCB's arranged thus:

Double-pole breaker --- CBUS module --- MCB1 --- MCB2 --- MCB3 --- MCB4

That arrangement more or less exactly fills up the enclosures I bought
at the time...

HTH

Paul G.



> -----Original Message-----
> From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On Behalf
Of
> Colin Leighton
> Sent: Tuesday, October 24, 2006 7:13 PM
> To: UKHA_D Group
> Subject: [ukha_d] C-bus enclosure
>
>  Can anyone supply me with a typical wiring diagram for inside an
> enclosure with C-Bus relays / dimmers. My understanding is that MCB`s
go
> on both input supply and each output of these units. Is this correct?
>
> [Non-text portions of this message have been removed]
>
>
>
>
> ** Sponsored by http://www.BERBLE.com **
> all the Cool Stuff, in one Place
>
>
>
>
>



** Sponsored by http://www.BERBLE.com **
all the Cool Stuff, in one Place