Re: Electronic Engineers of the list.

["bty727563" <derek.kennedy@xxxxxxxxxxxxxx>]

Chris,

I've used these very neat touchscreen LCDs on a couple of projects.
http://www.simmetry.com/
Might be the right sort of unit for you.

Cheers,
Derek.

--- In ukha_d@xxxxxxx, "Martin McCreesh" <martin@...>
wrote:
>
> Chris,
>
> Why use 2 CAT5 - if you have an embedded serial device just send
the command back to a reciever over the network and issue at NODE 0
through one of your devices configured as a mini server. You could
probably deliver power over ethernet on a single pair of the network
CAT5.
>
> When you say browse music - do you mean display on LCD?
>
> Martin
>
>
>   ----- Original Message -----
>   From: Chris Miles
>   To: ukha_d@xxxxxxx
>   Sent: Monday, October 23, 2006 11:12 AM
>   Subject: Re: [ukha_d] Electronic Engineers of the list.
>
>
>   Too Expensive just now with how much has been poured
>   into the house.
>
>   Chris
>   ----- Original Message -----
>   From: Jim Noble
>   To: ukha_d@xxxxxxx
>   Sent: Monday, October 23, 2006 10:30 AM
>   Subject: Re: [ukha_d] Electronic Engineers of the list.
>
>   Chris Miles wrote:
>   > Does anyone fancy embarking on a small project with me?
>   > I want to create a lightweight audio distribution and control
system.
>   > I have visualised it as follows...
>   > * Small device with LCD screen so sit anywhere there is a CAT5
point terminated, 2 CAT5 cables connecting to NODE0.
>   > * A embedded serial to ethernet device will allow manipulation
of the LCD screen, connected with one of the CAT5 cables.
>   > * An onboard IR reciever so I can browse music with a remote
control
>   > * A second CAT5 cable to send the IR signal back to NODE0, and
to take power down to the device.
>   >
>
>   Why not just use Slimp3s?
>
>   Jim
>
>   [Non-text portions of this message have been removed]
>
>
>
>
>
> [Non-text portions of this message have been removed]
>






** Sponsored by http://www.BERBLE.com **
all the Cool Stuff, in one Place