The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Finding a cable within a wall?!


  • Subject: Re: Finding a cable within a wall?!
  • From: "noel_pilot" <HA@xxxxxxxxxxxxxxxxxx>
  • Date: Tue, 12 Sep 2006 14:34:30 -0000

ok...sounding pretty good! definitely BandQ this weekend!!

the aerial leads in another place but same idea :)

the fun will really start when i've saved up some dosh and can remodel
the lounge! then the bedroom floors getting two nice holes in then
radio controlled car to run those cables!!



--- In ukha_d@xxxxxxx, "Ian Lowe" <ianlowe@...> wrote:
>
> I picked up a "proper" nylon snake with brass ends for only
=A36.99
from B&Q.
>=20=20
> 20m long, and bloody useful.
>=20=20
> I used it to run speaker cable from the front of my room, out
through the
> skin of the building, down through the cavity wall, through an air
brick
> into the floor void, across to the back of the room and up through a
hole
> drilled down through the inside of a partition wall...
>=20=20
> try *that* with a bamboo cane! :D
>=20=20
>=20=20
>=20
>   _____=20=20
>=20
> From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On
Behalf Of
> Phil Harris
> Sent: 11 September 2006 18:27
> To: ukha_d@xxxxxxx
> Subject: RE: [ukha_d] Finding a cable within a wall?!
>=20
>=20
>=20
> Or a cheap "value" curtain rail from Homebase can work quite
well
... I have
> one here that I use for just that.
>=20
> Phil=20
>=20
> > -----Original Message-----
> > From: ukha_d@yahoogroups. <mailto:ukha_d%40yahoogroups.com>
com
> [mailto:ukha_d@yahoogroups. <mailto:ukha_d%40yahoogroups.com>
com]=20
> > On Behalf Of Neil Fuller
> > Sent: 11 September 2006 18:11
> > To: ukha_d@yahoogroups. <mailto:ukha_d%40yahoogroups.com>
com
> > Subject: Re: [ukha_d] Finding a cable within a wall?!
> >=20
> > Noel
> >=20
> > If this is a one-off, you could save a few quid and use a=20
> > long bamboo cane.
> >=20
> > Of course, if you are going to do this more than a couple of=20
> > times, invest in a set of rods.
> >=20
> > Cheers
> >=20
> > Neil
> >=20
> > Chris Miles wrote:
> > >
> > > Buy yourself a set of cable rods off ebay/b&q and tie
your cable to=20
> > > the end and just keep feeding it till its where you want it
to be.
> > >
> > > I used this method for getting 4 cat 5 cables from my
loft=20
> > down behind=20
> > > the plaster and breezeblock to my living room at a specific
point.
> > >
> > > Chris
> > >
> > > ----- Original Message -----
> > > From: noel_pilot
> > > To: ukha_d@yahoogroups. <mailto:ukha_d%40yahoogroups.com>
com
> <mailto:ukha_d%40yahoogroups.com>
> > > Sent: Sunday, September 10, 2006 10:17 PM
> > > Subject: [ukha_d] Finding a cable within a wall?!
> > >
> > > Hi all,
> > > Running a new cable from the loft - power but definitely=20
> > for HA cos it=20
> > > will eventually be to power the loftbox!!
> > >
> > > I have the space between the walls ok, have pushed the cable
a=20
> > > suitable distance down and think it should be near the=20
> > socket i have=20
> > > in the bedroom below.
> > >
> > > Only trouble is, when I remove the socket below I can't=20
> > see/feel the=20
> > > cable from the loft!
> > >
> > > So....how do I find it?! There's insulation between the
wall, I was=20
> > > thinking about a pipe/cable detector but I believe that=20
> > they will only=20
> > > find mains connected cables which of coures this isn't yet!!
> > >
> > > So...any ideas from the professionals?!
> > >
> > > Thanks
> > >
> > > Noel
> > >
> > > [Non-text portions of this message have been removed]
> > >
> > >=20
> >=20
> >=20
> >=20
> > Yahoo! Groups Links
> >=20
> >=20
> >=20
> >=20
> >=20
> >=20
> >=20
> >=20
>=20
>=20
>=20
>=20=20
>=20
>=20
> [Non-text portions of this message have been removed]
>











UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.