The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: soundcard with 8 output jacks



A Creative Soundblaster Audigy 2 ZS is a 7.1 output sound card and
using some non-Creative drivers you can get at least 3 pairs of
independent outputs (see www.kxproject.com for more info and a full
compatibility list). The kx project gets very technical and I don't
claim to understand how all of it works, but it might be the solution
you need.

The 8 outputs from the Audigy card are via 3-off 3.5mm *4-pole* output
sockets so you'll need a few adaptors to get the outputs in the format
you need, but www.cpc.co.uk do loads and they're only pennies each :-)

HTH,

Tim.

On 9/27/06, John Murray <John.Murray@xxxxxxx> wrote:
> I need a 24bit soundcard for a windows PC with "8 balanced analog
> outputs 6.3mm (1/4")"
>
>
>
> Any suggestions?  I don't even know what it means.
>
> I thought the output jacks were supposed to be 3.5mm.



** Sponsored by www.BERBLE.com **
all the Cool Stuff, in one Place



UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.