Re: Any CCTV experts ?? Whiteout

["kw1816" <kw1816@xxxxxxxxxxx>]

Had a good look at the camera today and noticed a pin pushed out of
one of the internal molex plugs. Pushed it back in and now just
waiting for a bright day to try again.

Kevin W.


--- In ukha_d@xxxxxxx, Stephen McGarry <Selfbuild@...> wrote:
>
> Sounds like the camera is overexposing! Is it pointing south in the
> outside location. Looking at the leaflet there is a level control
under
> the sliding cover. Try adjusting this... Point the camera out of the
> window at a bright scene to allow adjustment.
>
>
> HTH
> Stephen
>
> kw1816 wrote:
> > Been scratching my head all day with this ...
> >
> > I've got a second hand Vantage Day/Night cctv camera that works
fine
> > when connected with a short coax patch lead to my Geovision card.
> > I got round to installing it today and when it's connected to the
> > external cable all I get is a white screen with a tiny bit of
grey
> > detail. Played with the white balance but it made no difference.
> >
> > First of all I thought the coax cable must be damaged but it
meters
> > out fine and with another camera connected it's fine as well.
Checked
> > the 12V supply and it seems fine, I even took the power supply
I'd
> > used to test it out with me but it made no difference.
> >
> > Removed the camera and brought it back into the study, hooked it
up
> > with the same cables and it worked fine.
> >
> > So what's going on ??  Cables work with another camera, camera
works
> > with another cable  - it's driving me mad !!!!
> >
> > Kevin W.
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
>