RE: X10 filters?

["Phil Harris" <phil@xxxxxxxxxxx>]

It's running as a single feed (not a ring) up to the computer room (a run
of
about - hmmm - 5ft) where it terminates in what is known as a "Cooker
Control Unit" ... the 45A switch switches the feed to the UPS and the
stuff
that doesn't need to be UPS'd is running from stripblocks plugged into the
switched outlet side.

It's not particularly "correct" but it works fine.

Phil

> -----Original Message-----
> From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On Behalf Of
> Paul Gale
> Sent: 28 January 2007 17:28
> To: ukha_d@xxxxxxx
> Subject: RE: [ukha_d] X10 filters?
>
> Thanks Phil - I remember you mentioned that before - did you run it
just
> as an extension or as a ring main to your "computer room"?
>
> Cheers,
>
> Paul.
>
>
> > -----Original Message-----
> > From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On Behalf
> > Of Phil Harris
> > Sent: 28 January 2007 17:24
> > To: ukha_d@xxxxxxx
> > Subject: RE: [ukha_d] X10 filters?
> >
> >
> > I just had a spare breaker on the DB in the garage and took the
output
> > from
> > that through an AD10 and into the smallest bedroom (A.K.A.
"the
> > computer
> > room") and ran everything of that...
> >
> > Phil
> >
> > > -----Original Message-----
> > > From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On
> > Behalf Of
> > > Paul Gale
> > > Sent: 28 January 2007 15:02
> > > To: ukha_d@xxxxxxx
> > > Subject: [ukha_d] X10 filters?
> > >
> > > Thinking about the power requirements in new node0 - want to
fit an
> > X10
> > > filter before ALL of the kit in there.
> > >
> > > What's the best way of doing this? Some kind of DIN rail
filter on
> > the
> > > supply to the new Node0 dist?
> > >
> > > What if it's on an existing ring main - I presume you have
to filter
> > both
> > > sides????
> > >
> > > Paul.
> > >
> > >
> > >
> > >
> > >
> > > [Non-text portions of this message have been removed]
> > >
> > >
> > >
> > >
> > >
> > >
> >
> >
> >
> >
> >
> >
>
>
>
>
>