[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Re: Rack faceplate for RS232?
drill & file ... is how we've done it in the past ... the metal is
fairly soft ... a vice is handy ... and a drill press ... but neither
essential ...
or, how about using some PCI card back-plates (LinITX do them with
two RS232 sockets & leads pre-installed for a few pounds) ...
Chris
On 16 Jun 2007, at 11:07, Paul Gordon wrote:
> My HA server has 10 serial ports fitted, - 8 of these are provided
> by an
> 'octopus' cable with approx 30cm flyleads.
>
>
>
> This is all hanging down the back of the rack, and is frankly, a
> bit of
> a mess...
>
>
>
> I'd really like to be able to put them all on a nice 1U rack faceplate
> mounted at the back of the rack.
>
>
>
> Does anyone know if there is a pre-made item available? I'd consider
> making my own, if only I could figure out how the hell to make the
> cut-outs...
>
>
>
> Cheers.
>
>
>
> Paul G.
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|