[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
RE: Simple flow switch for HA feedback
Cool thanks. It's hopefully for feedback into Comfort of the Central
Heatin=
g status. Hoping to fit one on the output from the boiler the feeds the CH
=
leg. I'll take a look at the suggestions.
Paul G.
-----Original Message-----
From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On Behalf Of T=
im Hawes
Sent: 29 June 2007 13:14
To: UKHA Group
Subject: Re: [ukha_d] Simple flow switch for HA feedback
Paul,
Not quite sure what you want it for (irrigation, central heating etc.)
but RS have a few (!) options.
257-076 @ =A311+vat, 15mm but not compression. max temp 85 degC
256-578 @ =A324+vat for 22mm compression. max temp 70 degC
256-562 as above but 15mm compression
395-6912 @ =A3102, 1/2" BSP, max temp 80 degC
HTH,
Tim.
On 6/29/07, Paul Gordon <paul@xxxxxxx> wrote:
> Can anyone point me in the direction of a simple flow switch that
could
> be plumbed in-line in 15mm pipe that could connect to a comfort input
> zone (i.e. volt-free contact)
>
>
>
> TIA
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|