The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: Re: File - UKHA_D Guidelines


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Urgent PC Help Needed



Just to double check the easiest thing first - do you have the 4way
square power plug attached to the motherboard? (that's been the cause of
no end of "failed-to-post" returns)

Mal



darren_karp2001 wrote:

> Hi all,
>
> My Vista PC is dead!
>
> I've changed the mobo and the drives appear to spin up but no video
> output whatsoever. I've removed all PCI boards and am using the onbard
> video card and getting nothing at all on the monitor. Also, no beeps
> from the mobo when powering up which is unusual I think. I've tried
> with no drives (sata) connected so basically the mobo with its power
> connector and nothing else.
>
> Anyone got any ideas as to what could be wrong? Could it be the PSU?
> It's an Antec TruePower 380. I've measure the molex connectors and get
> 12v, etc. but don't know how to measure the mobo power connector as I
> can't get the PSU to start up if its not connected.
>
> Any advice really appreciated.
> Darren
>
>





UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.