RE: xAP Switchboard info...

["Nigel Giddings" <nigel@xxxxxxxxxxxxxx>]

Kevin,

Thanks for the help.

You were right about the network interfaces... there is an un-used ATM
card which although disconnected was not disabled so it was picking that
IP address...

Disabled ATM port and reinstalled Switchboard and all is fine.

As you say it's a great app, just as is xAPTel, just wish I could read
up on it a bit more.

Thanks

Nigel

-----Original Message-----
From: Kevin Hawkins [mailto:lists@xxxxxxx]
Sent: 05 May 2007 16:50
To: ukha_d@xxxxxxx
Subject: Re: [ukha_d] xAP Switchboard info...

Hi Nigel,

Best place to start I'm sure would be the xAP Automation Group ..

http://groups.yahoo.com/group/xap_automation

I have seen a similar post there too a while back re the DLL issue sand
I had a similar issue but worked around it using an older installer and
then overwriting with newer files. But I think James has it all fixed
now.

Re the docs - there are some on the mi4 site but probably not of any
help in resolving the problem. The fact you see a different IP tells me
you might have two network interfaces active in you PC - if so it is
possible that SB is picking up the wrong one as its default. Again in
the settings you can alter this and force it to bind to a specific card.

There are posts re this on xAP Auto also if you holler there I'm sure J
can jump in with any install issues. It's worth getting it running as
it's a great application - I use it 24/7

Kevin

PS Glad the xAPTel bit works ;-)


> Just looking for a few pointers about xAP switchboard.
>
>
>
> Is there any documentation available? I have been looking, honest...
>
>
>
> I have installed twice, both times had error messages regarding DLL
and TLB?
>
>
>
> Switchboard is running but defaults to wrong IP address
xxx.xxx.xxx.82:52340 instead of .....88:52340
>
>
>
> I have xAPTel running and it shows the I/C number (Via Meteor) as a
bubble but doesn't pass it to switchboard...
>
>
>
> Any pointers as where to look much appreciated.
>
>
>
> TIA
>
>
>
> Nigel
>
>
> No virus found in this outgoing message.
> Checked by AVG Free Edition.
> Version: 7.5.467 / Virus Database: 269.6.4/789 - Release Date:
04/05/2007 17:49
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
>
>
>







No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.467 / Virus Database: 269.6.4/789 - Release Date:
04/05/2007 17:49