RE: "UK_Selfbuild" Consumer unit wiring

["Phil Harris" <phil@xxxxxxxxxxx>]

The normal C-Bus DIN rail dimmers have to have the control and dimmer
feeds
powered by the same phase - nothing will be damaged if they're not but they
just won't dim properly.

Phil

> -----Original Message-----
> From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On Behalf
> Of Pete Church
> Sent: 09 November 2007 20:02
> To: ukha_d@xxxxxxx
> Subject: RE: [ukha_d] "UK_Selfbuild" Consumer unit wiring
>
>
>
>
>
> >I had considered using a UPS to maintain the supply to C-Bus but
then
> >read that each module, within it's self, needs to be on the same
> >phase... I suppose what you have done is some modules totally on
UPS
> and
> >some totally not on the UPS?
>
> I thought it was the opposite and the control side could be on a
> different
> phase to the load, which makes Gareth's implementation possible.  I
> don't
> remember seeing any limitations being posed by different phases
between
> units either.
>
>
>
> Btw I'm only going to have single phase so haven't focused on this too
> much.
>
>
>
> Pete
>
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
>