[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Re: Fuse has blown inmy Pioneer plasma PSU
- Subject: Re: Fuse has blown inmy Pioneer plasma PSU
- From: "Slavo" <slavo@xxxxxxxxxxx>
- Date: Thu, 22 Nov 2007 13:49:54 -0000
Darren,
you need to replace the fuse with one that has the same current
characteristics. Inrush current is what you get when you switch some
appliances on. Current can be several times the rated amount (but
only for short period) so if you replaced it with ordinary one you
may blow it again first time you switch it on. The current curve for
your fuse is defined here.
http://www.socfuse.co.jp/SOCcatalogE/Page45.pdf
Slavo
--- In ukha_d@xxxxxxx, "darren_karp2001" <darren.karp@...>
wrote:
>
> Hi all,
>
> A 400 volt, 10 AMP 31mm glass fuse (filled with what looks like
sand)
> in the PSU of my old Pioneer PDP-502MXE plasma has blown.
>
> The fuse is made by SOC of Japan and the only spec I have seen
from
> their website (model number SHV14) is that it says Inrush-
withstand,
> whatever that means.
>
> What I need to know is if I can replace it with a standard 400v
10a
> fuse or not.
>
> Any help appreciated.
>
> Darren
>
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|