Re: Easier laying of cables

["Paul Bendall" <paul@xxxxxxxxxxxxxxxxx>]

Pete,

Thanks for the info on the Trend Routabout. The bigger hole would make=20
things easier and replacing the original floor cut-out would ensure=20
better insulation than a metal disk.

The hole made by the master Cavity would be ok for parallel runs to the=20
joist but perpendicular runs would require holes in the joists. At this=20
point I think the 102mm hole maybe too small to get a drill and bit=20
into for cutting the hole.

Both products are similarly priced:

Cavity Master: =A345 from TLC-Direct
Trend Routabout: =A342 from Tooled-up.com

Paul


--- In ukha_d@xxxxxxx, Pete Shew <pslists@...> wrote:
>
> Paul,
>=20
> the Cavity Master looks like an easy tool to use, but the 102mm
hole=20
> size might be a bit restricting if you want to do any work under
the=20
> floor. I have got a Trend Routabout which makes a 200mm hole and
uses=20
> the original piece of chipboard to fill the hole supported by a=20
plastic=20
> ring. It's not fast to make the hole, but when it's done the large=20
hole=20
> is opened in seconds.
>=20
> Have you got a price for the Cavity Master?
>=20
> Pete