[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
RE: Scart Switching/KAT5's/S-Video
- Subject: RE: Scart Switching/KAT5's/S-Video
- From: "Des Gibbons" <des@xxxxxxxxxxxx>
- Date: Wed, 6 Feb 2008 09:18:25 -0000
I have this hazy memory that there are different types of
s-video-scart
adapters, depending on if it is s-video-in or s-video-out, some adapters
are
dual and have a switch to convert between the two.
Probably not your problem, but just thought I would mention it to rule it
out.
Cheers, Des.
> -----Original Message-----
> From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx]
> On Behalf Of Marc Fuller
> Sent: 06 February 2008 08:21
> To: ukha_d@xxxxxxx
> Subject: Re: [ukha_d] Scart Switching/KAT5's/S-Video
>
> Hey Des,
>
> Indeed, it was the first thing I tried, unfortunately the
> same. I just don't understand how the S-video signal can be
> clean, but the composite is blurry. The composite signal
> should in theory be just as good.
>
> S-Video----> S-Video to Phono connector---->Composite
>
> Since the s-video signal is clean you would expect the
> composite to be also.
>
> All very weird :\
>
> Marc
>
> Des Gibbons wrote:
> >
> >
> >
> > > -----Original Message-----
> > > From: ukha_d@xxxxxxx <mailto:ukha_d%40yahoogroups.com>
> > [mailto:ukha_d@xxxxxxx <mailto:ukha_d%40yahoogroups.com>]
> > > On Behalf Of Marc Fuller
> >
> > > The WMCE
> > > server has a S-Video output that is connected to the
> switcher via a
> > > S-video cable to a scart adapter, which then plugs into the
> > > switcher.
> > >
> >
> > I would check the scart adapter also, it could be causing
> your problem.
> >
> > Cheers, Des.
> >
> >
>
>
>
>
> **** Sponsored By http://www.Berble.com ****
> **** Computers You Carry ****
>
>
>
>
>
>
>
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|