RE: Building the HP ML110 G4

[John Murray <John@xxxxxxxxxxxxxxxxxxxx>]

Shouldn't you be booting the server from the SmartStart CD that comes
with all new HP servers?  It assists with the creation of the raid array,
and walks you through the setup process.

From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On Behalf Of
ReynoldsB
Sent: 20 February 2008 20:04
To: Ukha_D
Subject: [ukha_d] Building the HP ML110 G4


Hi all,

Sorry for this but I am having a job creating an array than Windows SBS
2000
and Windows 2003 Server can see.

I have enabled the RAID in the BIOS and created the array using the F6
option during boot up. When the servers boot the drive is seen and
optimised
but when I start to load the server software it asks for the drivers to be
installed via a USB Floppy which I do okay but still windows can not find a
mass storage device to install onto so gives you the F3 option to quit!

Could someone point me to the correct RAID drivers in case I have got the
wrong ones?

I have now gone into the disk utility and selected format which is now on
20% which has taken about 3 hours so far..

Any suggestions would be very well received!

Thanks all,

B.

[Non-text portions of this message have been removed]



[Non-text portions of this message have been removed]