RE: Node0 design pics and extract fan...

["Paul Gale" <groups2@xxxxxxxxxxxxxxxx>]

SketchupPro:

www.sketchup.com

Free version also available :)

Paul.



> -----Original Message-----
> From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On Behalf
> Of Ben McCormack
> Sent: 26 January 2008 15:08
> To: ukha_d@xxxxxxx
> Subject: Re: [ukha_d] Node0 design pics and extract fan...
>=20
> Paul - What package did you use for the 3D visualisations?
>=20
> Ben
>=20
> On 26 Jan 2008, at 13:24, Paul Gale wrote:
>=20
> > I've updated my gallery with some still image visualisations of
my
> > new node0 in the loft - it's physically not too far off being
> > completed now with plasterboard and plastering still to go:
> >
> > http://www.siliconpixel.com/gallery/main.php/loft/Node0/
> >
> > There are also a few pics of my ventilation solution to help keep
> > Node0 cool (well, at least at ambient outside air temps if
needed).
> > This involves a very powerful Vent Axia Powerflow fan, a duct
> > attenuator (around 10dB attenuation at the important frequencies)
> > and 200mm insulated flexi ducting. The insulation is to help
absorb
> > some of the airflow and fan noise. Control is via a standard Vent
> > Axia variable speed controller - I still need to take it apart
and
> > see if I can hack it to interface to it and control at least 2-3
> > speeds. The Vent Axia fan that allows full interfacing and remote
> > control was over =A31000!!!
> >
> > Hope it's of some interest?...
> >
> > Paul.
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
>=20
>=20
>=20
> [Non-text portions of this message have been removed]
>=20
>=20
>=20
> **** Sponsored By http://www.Berble.com ****
> ****       Computers You Carry          ****
>=20
>=20
>=20
>=20
>=20
>=20