[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Re: In wall touch panel heights to comply with building regs
That sounds correct, switches etc not more than 1200mm above the floor
and
sockets etc not less than 450mm above the floor.
Tracey
----- Original Message -----
From: "darren_karp2001" <darren.karp@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: Thursday, May 29, 2008 6:20 PM
Subject: [ukha_d] In wall touch panel heights to comply with building regs
> Hi all,
>
> Can anyone give me some advice on what the maximum height an in wall
> touch panel can be on a new build. I've been told by a builder that
the
> top of the control panel or switch cannot be higher than 1200mm from
> finished floor level to comply with Part M of the bulding regulations.
>
> TIA
> Darren
>
>
> ------------------------------------
>
> **** Sponsored By http://www.Berble.com ****
> **** Computers You Carry ****
>
>
>
>
>
--------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG.
Version: 8.0.100 / Virus Database: 269.24.2/1471 - Release Date: 5/28/2008
5:33 PM
------------------------------------
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|