[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
RE: Re: Flow switches
Why not just use a humidity controlled fan, it should only then activate
when it needs too.
You could even fit an inline relay to prevent it coming on at certain times
if you wanted.
This is my plan, had the fan in a box for the past 2 years ! ... but still
not got around to fitting it :)
Regards
Marcus
________________________________
From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On Behalf Of
noel_pilot
Sent: 13 November 2008 18:38
To: ukha_d@xxxxxxx
Subject: [ukha_d] Re: Flow switches
Good question! I've just been wondering exactly the same! as i'm
moving to motion activated lights in the bathroom i didn't want the
lights to trigger the fan anymore, equally I'm also looking for a way
to automate the heated pads for behind the mirror and again the water
flow valve would be perfect.
N
--- In ukha_d@xxxxxxx<mailto:ukha_d%40yahoogroups.com>,
"John B" <home-automation@...> wrote:
>
> Hi all,
>
> I'm currently remodelling the bathroom, and naturally adding as much
HA as possible :-)
>
> I'm trying to automate the operation of the extractor fan, and was
looking at fitting a flow switch to the shower's water supply to
control the fan.
> (i.e. shower is switched on, fan switches on, shower switches off,
fan runs for an overrun period then switches off)
>
> Has anyone done something similar? Or can anyone recommend a decent
flow switch?
> I have some spare inputs on Comfort that I'm guessing I can use for
the flow switch, and the fan is on a C-Bus relay channel so it
shouldn't be a problem controlling it from Comfort.
>
> Ta for any help!
>
> John
>
[Non-text portions of this message have been removed]
------------------------------------
********************************************
Limited Time Offer - Free iPhone VAT Calculator
http://berble.com/index.php/component/content/article/109
********************************************
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|