The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: Re: Plugs


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

RE: Re: IR problems



Thanks, i'll give it a try.



From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On Behalf Of
rb_ziggy
Sent: 13 April 2009 09:59
To: ukha_d@xxxxxxx
Subject: [ukha_d] Re: IR problems








Keith

If you have the receiver in a tube to prevent oblique stray IR hitting it,
you may still be getting IR from the screen bouncing off an opposite wall
straight back into the receiver. I had a very similar problem with a plasma
screen.

I fixed it by attenuating the IR reaching the receiver by sticking a piece
of brown plastic packing tape over the receiver and then colouring it with
a
permanent black marker. Sounds a bit bizarre but I picked this tip up
elsewhere and tried it out and it worked for me. The tape alone didn't do
enough and you can experiment with the marker. I found that it didn't
noticably affect the strong remote control IR (from a Pronto in my case
which is pretty powerful) but knocked out the interference from the screen.

Regards

Richard

--- In ukha_d@xxxxxxx <mailto:ukha_d%40yahoogroups.com>
, "Keith
Finnett" <groups@...> wrote:
>
> Unfortunately not....i'm wondering if this is something that will have
to
be
> lived with.... L
>
>
>
> From: ukha_d@xxxxxxx <mailto:ukha_d%40yahoogroups.com>
[mailto:ukha_d@xxxxxxx
<mailto:ukha_d%40yahoogroups.com>
] On Behalf
Of
> Phil Harris
> Sent: 11 April 2009 14:55
> To: ukha_d@xxxxxxx <mailto:ukha_d%40yahoogroups.com>
> Subject: RE: [ukha_d] IR problems
>
>
>
>
>
>
>
>
> > Well the IR receiver is on top of an LCD screen, but now in a
tube to
> > protect it from stray IR and it's still happening as I thought
much the
> > same.
> >
> > In terms of the feedback loop how would you suggest I test for
this?
>
> Are there any IR emitters in the room? If there are then mask them off
to
> stop them emitting out into the room or cover up the receiver
completely...
>
> Phil
>
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.0.238 / Virus Database: 270.11.30/2025 - Release Date:
04/05/09
> 10:54:00
>
>
>
> [Non-text portions of this message have been removed]
>



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.0.238 / Virus Database: 270.11.30/2025 - Release Date: 04/13/09
05:51:00



[Non-text portions of this message have been removed]



------------------------------------


UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.