RE: Re: Home Automation Integration and touchscreen front end

["Nigel Giddings" <nigel@xxxxxxxxxxxxxx>]

Ben, Paul,



I use the Ethernet UCM to connect Homeseer to Comfort. I agree that only
one connection can occur at any one time. I leave Homeseer connected
normally and only disconnect when I want to connect with Comfigurator. I
did forget to reconnect a couple of times so set up a recurring event in
Homeseer to remind me to reconnect it to comfort if it is left
disconnected for 5 minutes or more...



Nigel



-----Original Message-----
From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On Behalf
Of Paul Gordon
Sent: 06 January 2009 22:14
To: UKHA Group
Subject: RE: [ukha_d] Re: Home Automation Integration and touchscreen
front end



I suspect not, - I think the UCM communication protocol only support
single-user operation... I'm not 100% sure with the ethernet ones though
- but aren't they a normal UCM with an extra ethernet daughterboard
mounted on top? - With a serial connection there's no problem - which
ever app starts up first get the COM port assigned to it, the connection
is permanent, and it prevents any other app from accessing it.. - I
could envisage that a network connection might well be more prone to
dropping & re-establishing the connection though, depending on what
protocol is being used, and whether it is a connectionless or a
connection-oriented protocol.... - getting a bit beyond my experience
here though.... - probably one for the Comfort forums...

HTH

Paul G.

> -----Original Message-----
> From: ukha_d@xxxxxxx <mailto:ukha_d%40yahoogroups.com>
[mailto:ukha_d@xxxxxxx
<mailto:ukha_d%40yahoogroups.com>
] On
Behalf
> Of Ben McCormack
> Sent: 06 January 2009 22:07
> To: UKHA Group
> Subject: Re: [ukha_d] Re: Home Automation Integration and touchscreen
> front end
>
> Paul
>
> Thats exactly what I am thinking. I am not sure the Ethernet UCM can
> multitask/thread.
>
> Ben
>
>
>
> On 6 Jan 2009, at 22:02, Paul Gordon wrote:
>
> > I noticed you said you're using an ethernet UCM, - I don't have
one
> of
> > those myself, but my first thought is does that support multiple
> > client
> > connections? - I know with the serial UCM's only 1 application
can
> use
> > it at a time, so in the early days when I only had 1 UCM, if
> > Homeseer &
> > the Comfort plugin was running, then Comfigurator could not
> > upload/download to or from Comfort because the COM port was in
> > use... -
> > perhaps you are seeing issues similar to this? - I guess you
could
> > test
> > this by shutting down all the other applications that connect to
> > Comfort
> > and run only Homeseer & the plugin for a while & see if
your
> > disconnection problems go away...
> >
> > I now have several separate serial UCMs dedicated to each
> application,
> > and I never (touch wood) suffer disconnections between Comfort
&
> > homeseer..
> >
> > Paul G.
> >
> > > -----Original Message-----
> > > From: ukha_d@xxxxxxx <mailto:ukha_d%40yahoogroups.com>
[mailto:ukha_d@xxxxxxx
<mailto:ukha_d%40yahoogroups.com>
] On
> > Behalf
> > > Of Ben McCormack
> > > Sent: 06 January 2009 21:55
> > > To: UKHA Group
> > > Subject: Re: [ukha_d] Re: Home Automation Integration and
> > touchscreen
> > > front end
> > >
> > > Right
> > >
> > > I have just ben into the loft to test everything.
> > >
> > > I am now getting the realtime responses in homeseer to the
changes
> > in
> > > zone state within Comfort.
> > >
> > > Now I am currently running homeseer, Comfigurator,
Wizcomfort all
> on
> > > the same machine. I have setup a dedicated homeseer user
with
> > Comfort.
> > >
> > > The problem I am finding is that homeseer looses connection
to
> > Comfort
> > > and I need to restart homeseer for it to pick up the
connection
> > again.
> > >
> > > Now this could be something to do with the other utilities I
am
> > > running on the server. I also remember something about
timeouts so
> I
> > > need to check that all tomorrow night.
> > >
> > > Paul - Thanks for the detailed info on Comfort/Homeseer. I
will
> > have a
> > > play tomorrow
> > >
> > > Ben
> > >
> > > On 6 Jan 2009, at 21:45, Paul Gordon wrote:
> > >
> > > > The CBUS functionality is fairly straightforward... you
should
> now
> > > > have
> > > > a number of Homeseer devices called czCounter:nnn - 1
for each
> > > Comfort
> > > > counter you specified, - so probably 256 in total...
> > > >
> > > > Each of those will automatically map to the
corresponding CBUS
> > group
> > > > number, - this is taken care of by the CBUS UCM, you
don't need
> to
> > do
> > > > anything in Homeseer. So CBUS group address 005 will
map onto
> > Comfort
> > > > counter 5; any change to the value of CBUS group 5 will
(via the
> > CBUS
> > > > UCM) automatically set the Comfort counter 5 to the
same value,
> > and
> > > > this
> > > > will then be reflected in the Homeseer device
czCounter:005. If
> > you
> > > > turn
> > > > CBUS group 5 on, you should see the Homeseer device
czCounter:005
> > > > change
> > > > value to 255, turn it off, you should see it in
Homeseer change
> > the
> > > > device value to 0. You can use these devicevalue
changes as
> > triggers
> > > > to
> > > > Homeseer events.
> > > >
> > > > Note that although it might seem counter-intuitive, the
reverse
> > > > operation does NOT work. - i.e. changing a comfort
counter value
> > > > (either
> > > > in Homeseer, or directly in Comfort) does NOT change
the
> > > corresponding
> > > > CBUS group address to the same value. - This is because
of how
> the
> > > > CBUS
> > > > UCM works, not anything to do with the plugin or with
Homeseer.
-
> > > > Basically, Comfort only *tracks* the CBUS group
addresses with
> its
> > > > counters, it does not allow you to control CBUS groups
via its
> > > > counters.
> > > > Instead there is a specific action in Comfort (197 I
think, but
> > it's
> > > > obvious if you use Comfigurator). You must call that
comfort
> > action
> > > > with
> > > > various parameters to send commands out onto the CBUS
from
> > Comfort.
> > -
> > > > Again, you can do this from Homeseer via the plugin,
because one
> > of
> > > > the
> > > > actions made available to Homeseer through the plugin
allows you
> > to
> > > > run
> > > > any Comfort response.
> > > >
> > > > HTH
> > > >
> > > > Paul G.
> > > >
> > > >
> > > > > -----Original Message-----
> > > > > From: ukha_d@xxxxxxx <mailto:ukha_d%40yahoogroups.com>
[mailto:ukha_d@xxxxxxx
<mailto:ukha_d%40yahoogroups.com>
]
On
> > > > Behalf
> > > > > Of Ben McCormack
> > > > > Sent: 06 January 2009 20:52
> > > > > To: UKHA Group
> > > > > Subject: Re: [ukha_d] Re: Home Automation
Integration and
> > > > touchscreen
> > > > > front end
> > > > >
> > > > > Paul
> > > > >
> > > > > Thats the create button I had missed. The plugin
has been
> > enabled.
> > > > >
> > > > > I need to check the status reporting is working
and then
> > understand
> > > > > how to get cbus working through homeseer
> > > > >
> > > > > Ben
> > > > >
> > > > > On 6 Jan 2009, at 20:46, Paul Gordon wrote:
> > > > >
> > > > > > From what I recall, the option to read the
devices into the
> > > plugin
> > > > > > from
> > > > > > the CCL file does little more than read the
number of
inputs,
> > > > > outputs,
> > > > > > RIO zones, and counters from the CCL file to
populate the
> > correct
> > > > > > numbers in the boxes on the plugin config
form. I think you
> > > > *still*
> > > > > > then
> > > > > > have to press the "Create" button
to have the plugin
actually
> > > > create
> > > > > > the
> > > > > > numbers of devices specifed...
> > > > > >
> > > > > > Once that's done, you still have to modify
many / most of
the
> > > > > > devices it
> > > > > > creates to customise them for your
environment, since the
> > devices
> > > > all
> > > > > > get created with generic names like
"IzZone 1" and so on. -
> > Not
> > > > sure
> > > > > > if
> > > > > > this still applies if you use the CCL file
method, as the
> > names
> > > > you
> > > > > > have
> > > > > > given to the zones in Comfort should be
available in the
> > CCL, so
> > > > > maybe
> > > > > > it's smart enough to read zone names as
well..
> > > > > >
> > > > > > I presume you've already configured the
connection to the
> UCM,
> > > and
> > > > > > that
> > > > > > this is working, - since you said you've seen
it report the
> > > > comfort
> > > > &
> > > > > > UCM Version details, this must be OK... You
also have to set
> > the
> > > > > > plugin
> > > > > > status to enabled in the Homeseer interfaces
configuration
if
> > you
> > > > > > haven't done that already...
> > > > > >
> > > > > > Once all this is done, you should have
real-time logging in
> > the
> > > > > > Homeseer
> > > > > > log of any changes to comfort zones, so if
you go & jump
> > around
> > > in
> > > > > > front
> > > > > > of a PIR, you should see that logged
virtually
> instantaneously
> > in
> > > > the
> > > > > > Homeseer log...
> > > > > >
> > > > > > HTH
> > > > > >
> > > > > > Paul G
> > > > > >
> > > > > > > -----Original Message-----
> > > > > > > From: ukha_d@xxxxxxx
<mailto:ukha_d%40yahoogroups.com>
> [mailto:ukha_d@xxxxxxx <mailto:ukha_d%40yahoogroups.com>
]
> > On
> > > > > > Behalf
> > > > > > > Of Ben McCormack
> > > > > > > Sent: 06 January 2009 20:22
> > > > > > > To: UKHA Group
> > > > > > > Subject: Re: [ukha_d] Re: Home
Automation Integration and
> > > > > > touchscreen
> > > > > > > front end
> > > > > > >
> > > > > > > Paul
> > > > > > >
> > > > > > > Thought I had got something wrong.
> > > > > > >
> > > > > > > There is a step where you use the plugin
to 'read' your
> > comfort
> > > > > > file.
> > > > > > > This then creates the devices. But I
dont seem to be able
> to
> > > > find
> > > > > > any
> > > > > > > of these devices. I will recheck.
> > > > > > >
> > > > > > > Ben
> > > > > > >
> > > > > > >
> > > > > > > On 6 Jan 2009, at 20:17, Paul Gordon
wrote:
> > > > > > >
> > > > > > > > Hi Ben,
> > > > > > > >
> > > > > > > > Yes, I'm afraid you must have got
it totally wrong!...
:-
> 0
> > > > > > > >
> > > > > > > > It's been a while since I installed
the plugin, so my
> > memory
> > > > of
> > > > > > the
> > > > > > > > exact process is a little bit
vague, but you have to go
> > > > through
> > > > > > some
> > > > > > > > setup steps to create devices in
Homeseer to represent
> all
> > > > your
> > > > > > > > Comfort
> > > > > > > > devices (inputs, outputs, counters,
etc.) - You should
> end
> > up
> > > > > with
> > > > > > > > *hundreds* of Homeseer devices for
comfort. - Have you
> > done
> > > > this
> > > > > > > > setup &
> > > > > > > > got all those devices?
> > > > > > > >
> > > > > > > > Paul G.
> > > > > > > >
> > > > > > > > > -----Original Message-----
> > > > > > > > > From: ukha_d@xxxxxxx
<mailto:ukha_d%40yahoogroups.com>
> > > [mailto:ukha_d@xxxxxxx <mailto:ukha_d%40yahoogroups.com>
]
> > > > On
> > > > > > > > Behalf
> > > > > > > > > Of Ben McCormack
> > > > > > > > > Sent: 06 January 2009 18:54
> > > > > > > > > To: UKHA Group
> > > > > > > > > Subject: Re: [ukha_d] Re: Home
Automation Integration
> > and
> > > > > > > > touchscreen
> > > > > > > > > front end
> > > > > > > > >
> > > > > > > > > OK
> > > > > > > > >
> > > > > > > > > I have now spent as couple of
evenings trying to get
> > > > homeseer
> > > > > > and
> > > > > > > > > Comfort to do something
slightly useful and I am
> getting
> > no
> > > > > > where.
> > > > > > > > >
> > > > > > > > > I have installed Homeseer and
the Comfort plugin.
> > > > > > > > >
> > > > > > > > > I get the homeseer to query
Comfort and retrieve the
> > > version
> > > > > > > > > information but not much else.
> > > > > > > > >
> > > > > > > > > Maybe I have got it all wrong
but I was expecting to
be
> > > able
> > > > to
> > > > > > see
> > > > > > > > > 'real time' zone status etc.
Have I got it totally
> > wrong?
> > > > > > > > >
> > > > > > > > > Ben
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > On 5 Jan 2009, at 14:34,
Gareth Cook wrote:
> > > > > > > > >
> > > > > > > > > > I'm the opposite - and
the support for the plugin is
> ,
> > > > well,
> > > > > > p155
> > > > > > > > > > poor.
> > > > > > > > > >
> > > > > > > > > > Paul - time to re-invent
your modified plugin ? :-)
> > > > > > > > > >
> > > > > > > > > > Yup. that's the one. I've
found it to be extremely
> > > > relaible
> > > > > > > (touch
> > > > > > > > > > wood).
> > > > > > > > > >
> > > > > > > > > > Paul G
> > > > > > > > > >
> > > > > > > > > >
________________________________
> > > > > > > > > >
> > > > > > > > > > From: ukha_d@xxxxxxx
<mailto:ukha_d%40yahoogroups.com>
 on behalf of Ben
> > McCormack
> > > > > > > > > > Sent: Mon 05/01/2009
13:31
> > > > > > > > > > To: UKHA Group
> > > > > > > > > > Subject: [ukha_d] Re:
Home Automation Integration
and
> > > > > > touchscreen
> > > > > > > > > > front
> > > > > > > > > > end
> > > > > > > > > >
> > > > > > > > > > Guys - Are you using the
pjcComfort2 plugin to
> connect
> > > > > Comfort
> > > > > > to
> > > > > > > > > > homeseer?
> > > > > > > > > >
> > > > > > > > > > --- In ukha_d@xxxxxxx
<mailto:ukha_d%40yahoogroups.com>
, "Paul Gordon"
> > <paul@...>
> > > > > wrote:
> > > > > > > > > > >
> > > > > > > > > > > Indeed, Gareth's
experience does generally differ
> > from
> > > > my
> > > > > > own,
> > > > > > > > but
> > > > > > > > > > I've
> > > > > > > > > > > always attributed
that to the fact that Gareth
> > > generally
> > > > is
> > > > > > > > > > "pushing the
> > > > > > > > > > > envelope"
rather further than I do...
> > > > > > > > > > >
> > > > > > > > > > > :-)
> > > > > > > > > > >
> > > > > > > > > > > Paul G.
> > > > > > > > > > >
> > > > > > > > > > > -----Original
Message-----
> > > > > > > > > > > From: ukha_d@xxxxxxx
<mailto:ukha_d%40yahoogroups.com>
> > > > > [mailto:ukha_d@xxxxxxx
<mailto:ukha_d%40yahoogroups.com>
]
> > > > > > On
> > > > > > > > > > Behalf
> > > > > > > > > > > Of Gareth Cook
> > > > > > > > > > > Sent: 04 January
2009 19:21
> > > > > > > > > > > To: UKHA Group
> > > > > > > > > > > Subject: Fw:
[ukha_d] Home Automation Integration
> > and
> > > > > > > > touchscreen
> > > > > > > > > > front
> > > > > > > > > > > end
> > > > > > > > > > >
> > > > > > > > > > > Paul and myself chat
often as we have almost the
> > same
> > > > > > > > installation
> > > > > > > > > > with
> > > > > > > > > > > Comfort, CBUS,
Homeseer, and Sonos.
> > > > > > > > > > >
> > > > > > > > > > > I would like to say
that the PC component is as
> > flakey
> > > > as
> > > > a
> > > > > > > > box of
> > > > > > > > > > > cornflakes - always
has been and I've been running
> > > > Homeseer
> > > > > > for
> > > > > > > > > > several
> > > > > > > > > > > years.
> > > > > > > > > > >
> > > > > > > > > > > The Comfort plugin
is ok, but has a temper now and
> > > > again -
> > > > > > and
> > > > > > > > the
> > > > > > > > > > Sonos
> > > > > > > > > > >
> > > > > > > > > > > plugin is not stable
at all. If you dont mind
> > checking
> > > > your
> > > > > > > > system
> > > > > > > > > > every
> > > > > > > > > > >
> > > > > > > > > > > now and again,
you'll be fine. I too, like Paul,
> > have
> > > > CBUS
> > > > > > > > buttons
> > > > > > > > > > > activating Sonos
stuff and the like - and we have
> to
> > > use
> > > > > > > > Homeseer
> > > > > > > > > as
> > > > > > > > > > > that's the only
route between Sonos and Comfort -
> > but
> > > > it's
> > > > > > > often
> > > > > > > > > not
> > > > > > > > > > > functioning because
one of the 2 plugins has died
> on
> > > its
> > > > > > arse.
> > > > > > > > > > >
> > > > > > > > > > > I plan to reinstall
(for the umpteen time) and try
> > to
> > > > keep
> > > > > > to
> > > > > > a
> > > > > > > > > > stable
> > > > > > > > > > > revision of
everything (ie one but last of the
> > Comfort
> > > > > > plugin)
> > > > > > > > but
> > > > > > > > > > both
> > > > > > > > > > > plugins really
requires some extensive QA work -
> > > > stability
> > > > > > is
> > > > > > > > > > severely
> > > > > > > > > > > lacking. Even
Comfort has it's moments, but CBUS
> has
> > > > never
> > > > > > ever
> > > > > > > > > gone
> > > > > > > > > > > wrong.
> > > > > > > > > > >
> > > > > > > > > > > G.
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > Ben,
> > > > > > > > > > >
> > > > > > > > > > > I agree with pretty
much all those choices, with
> the
> > > > > > exception
> > > > > > > > of
> > > > > > > > > > > Smartfit... - the
good thing about it is there is
a
> > > > > > dedicated
> > > > > > > > UCM
> > > > > > > > > to
> > > > > > > > > > > integrate smartfit
& comfort, but the downside is
> > that
> > > > > > > > smartfit is
> > > > > > > > > a
> > > > > > > > > > > pretty dumb system,
and is only suitable for
> certain
> > > > > Central
> > > > > > > > > Heating
> > > > > > > > > > > designs. The newer
Hometronic system is far better
> > in
> > > > most
> > > > > > > > > respects,
> > > > > > > > > > > although there isn't
a dedicated UCM for it
> > > > unfortunately.
> > > > > I
> > > > > > > > > believe
> > > > > > > > > > > Cytech were (are?)
attempting to make an
> arrangement
> > > > with
> > > > > > > > > > Honeywell with
> > > > > > > > > > > a view to developing
a Hometronic UCM, but I've
> > heard
> > > > > > nothing
> > > > > > > on
> > > > > > > > > > this
> > > > > > > > > > > for the last 2 years
or so, so I guess that idea
> > never
> > > > got
> > > > > > off
> > > > > > > > the
> > > > > > > > > > > ground (shame).
Hometronic is, as you've noticed,
> > > > > > significantly
> > > > > > > > > more
> > > > > > > > > > > expensive,
especially if you have lots of
radiators
> > all
> > > > > > needing
> > > > > > > > the
> > > > > > > > > > > hometronic control
valves on them, although I
guess
> > you
> > > > > > *could*
> > > > > > > > > > > implement it in
phases to reduce the initial
> impact.
> > > > > > > > > > >
> > > > > > > > > > > In case you hadn't
sussed, it *is* actually
> possible
> > to
> > > > > > > > implement
> > > > > > > > a
> > > > > > > > > > > degree of
integration between Hometronic &
Comfort,
> > > > using
> > > > > > some
> > > > > > > > of
> > > > > > > > > > the
> > > > > > > > > > > Hometronic modules
that provide digital input/
> > outputs
> > > > that
> > > > > > can
> > > > > > > > > > then be
> > > > > > > > > > > connected to Comfort
outputs/inputs to signal
> > discrete
> > > > > > states,
> > > > > > > > and
> > > > > > > > > > > enable Comfort to
control Hometronic (i.e comfort
> > could
> > > > > > have a
> > > > > > > > > > number of
> > > > > > > > > > > outputs connected to
Hometronic, each signal line
> > could
> > > > > then
> > > > > > be
> > > > > > > > > > > programmed in
Hometronic to set a particular
> > > "lifestyle"
> > > > so
> > > > > > for
> > > > > > > > > > instance
> > > > > > > > > > > Comfort would be
able to turn off all heating when
> > set
> > > > to
> > > > > > away
> > > > > > > > > > mode...)
> > > > > > > > > > >
> > > > > > > > > > > I already have
almost all the components of the
> > system
> > > > that
> > > > > > > > you've
> > > > > > > > > > > specified (Comfort,
CBUS, SONOS, Homeseer) and I
> > > > actually
> > > > > > > > settled
> > > > > > > > > on
> > > > > > > > > > > Hometronic for my
heating as well, and even went
as
> > > > far as
> > > > > > > > getting
> > > > > > > > > a
> > > > > > > > > > > quote for a system.
Unforseen circumstances have
> > > > repeatedly
> > > > > > > > forced
> > > > > > > > > > me to
> > > > > > > > > > > put it on hold
unfortunately, so I still haven't
> got
> > > > round
> > > > > > to
> > > > > > > > > > purchasing
> > > > > > > > > > > it, although I do
still intend to when
> circumstances
> > > > allow.
> > > > > > > > > > >
> > > > > > > > > > > If you haven't
already experimented with Homeseer,
> > its
> > > > > worth
> > > > > > > > > > pointing
> > > > > > > > > > > out that there is
just about to be a new component
> > > > launched
> > > > > > > > for it
> > > > > > > > > > which
> > > > > > > > > > > is specifically
designed for easy implementation
of
> > > > > > > > touchscreens.
> > > > > > > > > > > "Homeseer
Touch" is in beta at the moment, and
I've
> > > been
> > > > > > > playing
> > > > > > > > > > with it
> > > > > > > > > > > for a couple of
months. It is pretty simple &
> > > > > > straightforward,
> > > > > > > > and
> > > > > > > > > > > integrates
seamlessly with Homeseer. It's still a
> > bit
> > > > rough
> > > > > > > > around
> > > > > > > > > > the
> > > > > > > > > > > edges, but I believe
in time it will be an
> extremely
> > > > > capable
> > > > > > > > > > system, and
> > > > > > > > > > > almost a no-brainer
for anyone who already runs
> > > > Homeseer.
> > > > > > > > > > >
> > > > > > > > > > > Using this
combination of components I've been
> > able to
> > > > > > achieve
> > > > > > > > some
> > > > > > > > > > > additional
integration that actually isn't
> > possible if
> > > > any
> > > > > > of
> > > > > > > > them
> > > > > > > > > > are
> > > > > > > > > > > omitted. For
instance I can have CBUS buttons
> > control
> > > > SONOS
> > > > > > > > zones
> > > > > > > > > so
> > > > > > > > > > > that my "room
off" button that I have on all my
> CBUS
> > > > > keypads
> > > > > > > can
> > > > > > > > > > also
> > > > > > > > > > > stop the SONOS zone
playing in that room as well,
> > which
> > > > > > makes
> > > > > > > > for
> > > > > > > > a
> > > > > > > > > > > nicer overall
experience. This particular function
> > uses
> > > > > > > Homeseer
> > > > > > > > to
> > > > > > > > > > > bridge several
systems via their respective
plugins
> > > > > (signals
> > > > > > > go:
> > > > > > > > > > CBUS
> > > > > > > > > > > --> Comfort
--> Homeseer --> SONOS)
> > > > > > > > > > >
> > > > > > > > > > > If you'd like any
further info about my
> experiences,
> > > > then
> > > > > > just
> > > > > > > > > > holler.
> > > > > > > > > > >
> > > > > > > > > > > HTH
> > > > > > > > > > >
> > > > > > > > > > > Paul G.
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > > -----Original
Message-----
> > > > > > > > > > > > From:
ukha_d@xxxxxxx
<mailto:ukha_d%40yahoogroups.com>
> > > > > [mailto:ukha_d@xxxxxxx
<mailto:ukha_d%40yahoogroups.com>
> > > > > > ]
> > > > > > > > On
> > > > > > > > > > Behalf
> > > > > > > > > > > > Of Ben
McCormack
> > > > > > > > > > > > Sent: 04
January 2009 16:16
> > > > > > > > > > > > To: UKHA Group
> > > > > > > > > > > > Subject:
[ukha_d] Home Automation Integration
and
> > > > > > touchscreen
> > > > > > > > > > front
> > > > > > > > > > > end
> > > > > > > > > > > >
> > > > > > > > > > > > All
> > > > > > > > > > > >
> > > > > > > > > > > > As I am suer
many of you are aware we have
> > recently
> > > > moved
> > > > > > > > into a
> > > > > > > > > > new
> > > > > > > > > > > > house that
needs renovation. This has given me
> the
> > > > > > chance to
> > > > > > > > > > automate
> > > > > > > > > > > > the house. I
have tried to use best of breed in
> > each
> > > > area
> > > > > > > > where
> > > > > > > > > > > > possible and
integrate systems as well.
> > > > > > > > > > > >
> > > > > > > > > > > > I have arrived
at the following scheme
> > > > > > > > > > > >
> > > > > > > > > > > > Lighting : Cbus
> > > > > > > > > > > > Alarm : Comfort
> > > > > > > > > > > > Heating :
Smartfit
> > > > > > > > > > > > Temp Monitoing
: 1-Wire using HA7Net. This is
> > based
> > > on
> > > > > > recent
> > > > > > > > > > > > discussions.
> > > > > > > > > > > > All the media
in the house will be supplied from
> > my
> > > > Mac
> > > > > > Mini
> > > > > > > > > > Server
> > > > > > > > > > > > and Sonos.
> > > > > > > > > > > >
> > > > > > > > > > > > cbus and
Comfort are linked
> > > > > > > > > > > > Comfort and
Smartfit are linked
> > > > > > > > > > > >
> > > > > > > > > > > > So I have
Lighting, Heating and Alarm
> > integrated. So
> > > > far
> > > > > > > > Comfort
> > > > > > > > > > will
> > > > > > > > > > > > be my main
interface so I can use Comfort
> > keypads or
> > > > the
> > > > > > DECT
> > > > > > > > > > phones
> > > > > > > > > > > > in the house to
control things.
> > > > > > > > > > > >
> > > > > > > > > > > > Now I have
added 1-Wire I am starting to think
> how
> > to
> > > > > > > > integrate
> > > > > > > > > > that
> > > > > > > > > > > > and make
intelligent decisions based on room
> > > > temperature
> > > > > > and
> > > > > > > > also
> > > > > > > > > > > > provide temp
logging and graphing.
> > > > > > > > > > > >
> > > > > > > > > > > > There is one
area that I don't think I have
> worked
> > > out
> > > > > yet
> > > > > > > and
> > > > > > > > > > that is
> > > > > > > > > > > > the overall
control mechanism. I guess ideally I
> > > would
> > > > > > like
> > > > > > a
> > > > > > > > > > couple
> > > > > > > > > > > > of wireless
touch-screens that could display
> > > > information
> > > > > > > about
> > > > > > > > > the
> > > > > > > > > > > > house and allow
me to control various functions.
> > > > > > > > > > > >
> > > > > > > > > > > > I can see that
homeseer could be used as an
> > > interface.
> > > > It
> > > > > > has
> > > > > > > > > > plugins
> > > > > > > > > > > > for most of my
components.
> > > > > > > > > > > >
> > > > > > > > > > > > Are there any
other options I could look at?
> > > > > > > > > > > >
> > > > > > > > > > > > Ben
> > > > > > > > > > > >
> > > > > > > > > > > >
------------------------------------
> > > > > > > > > > > >
> > > > > > > > > > > >
********************************************
> > > > > > > > > > > > Limited Time
Offer - Free iPhone VAT Calculator
> > > > > > > > > > > >
> > > > http://berble.com/index.php/component/content/article/109
<http://berble.com/index.php/component/content/article/109>
> > > > > > > > > > > >
********************************************
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > No virus found
in this incoming message.
> > > > > > > > > > > > Checked by AVG
- http://www.avg.com
<http://www.avg.com>
> > > > <http://www.avg.com/ <http://www.avg.com/> >
> > > > > > > > > > > > Version:
8.0.176 / Virus Database: 270.10.1/1870
> -
> > > > > Release
> > > > > > > > Date:
> > > > > > > > > > > > 03/01/2009
14:14
> > > > > > > > > > >
> > > > > > > > > > >
------------------------------------
> > > > > > > > > > >
> > > > > > > > > > >
********************************************
> > > > > > > > > > > Limited Time Offer -
Free iPhone VAT Calculator
> > > > > > > > > > >
> http://berble.com/index.php/component/content/article/
<http://berble.com/index.php/component/content/article/>
> > > > 109
> > > > > > > > > > >
********************************************
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > Unless stated
otherwise above:
> > > > > > > > > > > IBM United Kingdom
Limited - Registered in England
> > and
> > > > > Wales
> > > > > > > > with
> > > > > > > > > > number
> > > > > > > > > > >
> > > > > > > > > > > 741598.
> > > > > > > > > > > Registered office:
PO Box 41, North Harbour,
> > > Portsmouth,
> > > > > > > > Hampshire
> > > > > > > > > > PO6
> > > > > > > > > > > 3AU
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > [Non-text portions
of this message have been
> > removed]
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
------------------------------------
> > > > > > > > > > >
> > > > > > > > > > >
********************************************
> > > > > > > > > > > Limited Time Offer -
Free iPhone VAT Calculator
> > > > > > > > > > >
> http://berble.com/index.php/component/content/article/
<http://berble.com/index.php/component/content/article/>
> > > > 109
> > > > > > > > > > >
********************************************
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > No virus found in
this incoming message.
> > > > > > > > > > > Checked by AVG - http://www.avg.com
<http://www.avg.com>
 <http://
> > > > www.avg.com/>
> > > > > > > > > > > Version: 8.0.176 /
Virus Database: 270.10.1/1870 -
> > > > Release
> > > > > > > Date:
> > > > > > > > > > > 03/01/2009 14:14
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
------------------------------------
> > > > > > > > > >
> > > > > > > > > > [Non-text portions of
this message have been
removed]
> > > > > > > > > >
> > > > > > > > > >
------------------------------------
> > > > > > > > > >
> > > > > > > > > > Unless stated otherwise
above:
> > > > > > > > > > IBM United Kingdom
Limited - Registered in England
> and
> > > > Wales
> > > > > > with
> > > > > > > > > > number
> > > > > > > > > > 741598.
> > > > > > > > > > Registered office: PO Box
41, North Harbour,
> > Portsmouth,
> > > > > > > Hampshire
> > > > > > > > > > PO6 3AU
> > > > > > > > > >
> > > > > > > > > > [Non-text portions of
this message have been
removed]
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > [Non-text portions of this
message have been removed]
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
------------------------------------
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > No virus found in this
incoming message.
> > > > > > > > > Checked by AVG - http://www.avg.com
<http://www.avg.com>
> > > > > > > > > Version: 8.0.176 / Virus
Database: 270.10.2/1876 -
> > Release
> > > > > Date:
> > > > > > > > > 06/01/2009 07:56
> > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > [Non-text portions of this message have
been removed]
> > > > > > >
> > > > > > >
> > > > > > > ------------------------------------
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > No virus found in this incoming message.
> > > > > > > Checked by AVG - http://www.avg.com <http://www.avg.com>
> > > > > > > Version: 8.0.176 / Virus Database:
270.10.2/1876 - Release
> > > Date:
> > > > > > > 06/01/2009 07:56
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > > >
> > > > > [Non-text portions of this message have been
removed]
> > > > >
> > > > >
> > > > > ------------------------------------
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > No virus found in this incoming message.
> > > > > Checked by AVG - http://www.avg.com <http://www.avg.com>
> > > > > Version: 8.0.176 / Virus Database: 270.10.2/1876 -
Release
> Date:
> > > > > 06/01/2009 07:56
> > > >
> > > >
> > >
> > >
> > >
> > > [Non-text portions of this message have been removed]
> > >
> > >
> > > ------------------------------------
> > >
> > >
> > >
> > >
> > > No virus found in this incoming message.
> > > Checked by AVG - http://www.avg.com <http://www.avg.com>
> > > Version: 8.0.176 / Virus Database: 270.10.2/1876 - Release
Date:
> > > 06/01/2009 07:56
> >
> >
>
>
>
> [Non-text portions of this message have been removed]
>
>
> ------------------------------------
>
>
>
>
> No virus found in this incoming message.
> Checked by AVG - http://www.avg.com <http://www.avg.com>
> Version: 8.0.176 / Virus Database: 270.10.2/1876 - Release Date:
> 06/01/2009 07:56





[Non-text portions of this message have been removed]


------------------------------------