RE: Silent Gliss Autoglide

["ben addison" <ben@xxxxxxxxxxxxxx>]

Hi Rob,



The RACUB should be fine to control the 5090, I use the 5090 on most jobs
and control them from a c-bus relay or comfort.

The RACUB looks to be a zero volt relay.

All you need to do is just cut the switch off that comes with the 5090 then
connect the green and yellow wire across the N/O relay.



I do sell Silent Gliss products if you would like me to quote for anything.
Most items can be delivered to you the same week.



Thanks



Ben Addison





_____

From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On Behalf Of
Rob James
Sent: 10 March 2009 22:25
To: ukha_d@xxxxxxx
Subject: [ukha_d] Silent Gliss Autoglide




I've been looking at the Silent Gliss Autoglide 5090 system but I have a
few
questions that hopefully someone can answer.

I have Rako controlled lighting in use in the room I would like to use
these
curtains motors, but I'm not sure whether the 5090 basic model will be
compatible with the RACUB.

If it is compatible, and if I wasn't worried about independant curtain
control, could more than one 5090 be used with a single RACUB?

Can anyone recommend a competitive supplier?

Regards

Rob

__________________________________________________________
Free photo editing software from Windows Live . Try it now!
http://clk.atdmt. <http://clk.atdmt.com/UKM/go/134665240/direct/01/>
com/UKM/go/134665240/direct/01/

[Non-text portions of this message have been removed]



Internal Virus Database is out of date.
Checked by AVG - www.avg.com
Version: 8.0.233 / Virus Database: 270.10.18/1935 - Release Date: 02/04/09
16:35:00




[Non-text portions of this message have been removed]



------------------------------------