[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Re: OT: Connector strips with leaf protection ?
- Subject: Re: OT: Connector strips with leaf protection ?
- From: "leewild80" <muddyboots@xxxxxxxxx>
- Date: Tue, 22 Sep 2009 14:26:27 -0000
Hi Tim
No, they're not tinned - been cut to length to terminate inside the alarm
panel; and I haven't seen my soldering iron in years :)
Cheers
Lee
--- In ukha_d@xxxxxxx, Tim Hawes <timsyahoo@...> wrote:
>
> Aren't the stranded cores in the alarm cable tinned? (i.e. coated with
solder)
> If not I guess you could tin them yourself...
>
> Cheers,
>
> Tim.
>
> On Tue, Sep 22, 2009 at 11:12 AM, leewild80 <muddyboots@...>
wrote:
> > Hi
> >
> > Wonder if anyone on here can point me in the right direction.
> >
> > I'm looking for some small terminal/connector strips, which have
leaf protection over the screw heads to avoid damage to fine stranded
wires.
> > Only low voltage & current (ie few hundred mA max).
> >
> > I need to common up power supply wires to a number of PIR
detectors in my alarm box, and the screws in ordinary terminal strips are
chewing the wires.
> >
> > Don't need many...
> >
> > Any ideas ?
> >
> > Ta
> > Lee
>
------------------------------------
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|