The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: Our New Home Server Isn't a Server - The Synology 1813+ NAS Review


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

RE: Re: Tell me about 1-wire...



Can you tell me a little more about this item? - it's just reminded me
that
I do need to do something about my temperature sensing solution... - I
previously used a couple of Quasar boards to support up to 8 DS1820s, but
they rely on RS232 port power... - when I virtualised my HA server I
implemented an Ethernet-RS232 server box to provide up to 8 serial ports
via
the LAN... but the serial ports presented by that box don't have (or don't
have enough) power to run the Quasar boards, so I haven't had any
temperature sensing going on since I virtualised... I've been meaning to do
something about that for a fair while...

So, I already have a bunch of the 1-wire temp sensors kicking around... I'd
like to get them back into use... I need a solution that I can implement
pretty much out of the box... - if I haven't had time to even think about
this for nigh on a year, you can be sure I don't have time to be soldering
up my own boards and/or rolling my own code!

I want the solution to integrate with Homeseer...

I *need* the solution to NOT be dependent on serial ports to provide power!

I suppose one thing I could try to think about would be to modify the
Quasar
boards to run on power from a separate wall-wart, - but see my earlier
comment about soldering!

Anyone got any thoughts / suggestions?

TIA

Paul G.


-----Original Message-----
From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On Behalf Of
Stuart Poulton
Sent: 01 December 2010 19:28
To: ukha_d@xxxxxxx
Subject: Re: [ukha_d] Re: Tell me about 1-wire...

Hi Folks,

I've contacted a couple of people who expressed an interest in PCB's  &
connectors for 1-wire temp sensors.

Pictures from Kevin here: http://bit.ly/c5Rkxj

If anyone else is interested, please get in touch off list, I'd like to get
a parts order sent off in the next few days to get parts shipped out in
time
for tinkering over the xmas holidays.

Cheers

Stuart

[Non-text portions of this message have been removed]



------------------------------------



UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.