RE: Automating immersion heater from Solar Voltaic ?

[Marcus Warrington <marcus.warrington@xxxxxxxxxx>]

The FIT scheme pays 3p for each KW you export back to the grid, so not
much=
in it based on your figures. I guess it depends very much on the cost of y=
our Gas (and how much we expect Gas prices to rise).


Marcus

From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On Behalf Of S=
imon Haslam
Sent: 17 January 2011 18:15
To: ukha_d@xxxxxxx
Subject: Re: [ukha_d] Automating immersion heater from Solar Voltaic ?



It sounds a good idea but I suggest your friend checks his sums and looks
a=
t his hot water usage carefully before going too far down this route.

For example, a 150l cylinder takes about 7kWh* to heat from 19C to 60C
(tha=
t's just a figure I had to hand) and loses about 1-2kWh (IIRC) a day.
Above=
that the immersion thermostat will cut off the supply. So if your friend u=
ses that much hot water a day in summer then it will easily absorb 2-3 kWh
=
from his panels. However with a modern gas boiler say that's 8kWh gas
which=
on my tariff is 6.7 (first 125 pqtr) or 2.7p/kWh =3D about =A316 a month i=
n the summer which needs to be compared to what he'd get for exporting the
=
electricity. (I'm not sure on this - the FIT distorts things somewhat).

Home PV is a bit like Solar Thermal where you get the most energy when you
=
least need it. I'm not certainly not saying using PV for DHW is a bad
idea,=
just to make sure it's worth the effort... and if you do the calcs please =
post them on here so that others can see your conclusions :)

* kWh energy stored in DHW ~=3D <volume(l)> * 4.18 * <temp
diff> / 3600






[Non-text portions of this message have been removed]



------------------------------------

<*> Join the Automated Home Forums
http://www.automatedhome.co.uk/vbulletin/