RE: C-Bus wireless, X10 or Z-Wave?

["Neil Ball" <neilball@xxxxxxxxxxxxxxx>]

Depends on the lamps ultimately and whether they can be dimmed with
leading/trailing edge dimmers. If they can then you have the issue of
dimme=
r
minimum loads as well. I=92ve been surprised with the speed of development
=
of
LED fittings that can be controlled with trailing edge dimmers (from the
likes of Philips), while they are not yet at a price that makes them
suitable for the masses it does show that it is possible to find suitable
low energy lighting that will work with these kinds of dimmers. There are
also more and more retro-fittable LED  lamps of all types coming over from
China, some of which do show promise as replacements for incandescents.

=20

Neil B.

=20

From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On Behalf Of
Marcus Warrington
Sent: 20 January 2011 14:26
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] C-Bus wireless, X10 or Z-Wave?

=20

=20=20

I don't want to push this thread off topic but I'm interested to know how
these solutions (CBUS , RAKO etc) fair in relation to the phasing out of
incandescent bulbs. At the moment I have all the lights in our house on
LD11's, but with the phasing out of incandescent bulbs and the minimum load
requirement of x10 (40watts) I can see me having to rethink my install in
the next couple of years. If I'm going to replace then I'd like something
that will work with LED lights since I'm sure they will become the standard
in a few years time.

Marcus

From: ukha_d@xxxxxxx <mailto:ukha_d%40yahoogroups.com>
[mailto:ukha_d@xxxxxxx
<mailto:ukha_d%40yahoogroups.com>
] On Behal=
f
Of Dean Barrett
Sent: 20 January 2011 14:01
To: ukha_d@xxxxxxx <mailto:ukha_d%40yahoogroups.com>=20
Subject: RE: [ukha_d] C-Bus wireless, X10 or Z-Wave?

It is the same price for a 4 scene wall controller though :)

Rako is very expandable (and now wired too as mentioned by Neil) - very
ver=
y
reliable, and is great for integration purposes.

Via RS232 its good to intergrate with Control4, Opus, Systemline, Philips
Pronto etc. etc.

Dean.

-----Original Message-----
From: ukha_d@xxxxxxx <mailto:ukha_d%40yahoogroups.com>
<mailto:ukha_d%40yahoogroups.com>
[mailto:ukha_d@xxxxxxx
<mailto:ukha_d%40yahoogroups.com>
<mailto:ukha_d%40yahoogroups.com>]
On
Behalf Of
Ste Daniels
Sent: 20 January 2011 13:30
To: ukha_d@xxxxxxx <mailto:ukha_d%40yahoogroups.com>
<mailto:ukha_d%40yahoogroups.com>
Subject: Re: [ukha_d] C-Bus wireless, X10 or Z-Wave?

Hi Dean,

That'd sure have to be some special kind of discount..

=A3151.13 for an on and off switch?!?!
http://www.avjungle.co.uk/index.php?main_page=3Dproduct_info
<http://www.avjungle.co.uk/index.php?main_page=3Dproduct_info&cPath=3D72&pr=
oduct
s> &cPath=3D72&products
_id=3D306

.. just Googled and this seems to be the ball park figure for Rako Wireless
kit.

Obviously not for the likes of a DIY HAer like myself!

Going back to dream...

Steve

On 20 January 2011 13:17, Dean Barrett <dean@xxxxxxx
<mailto:dean%40rolec.net> <mailto:dean%40rolec.net>> wrote:

> Can't comment specifically on CBus wireless as all our wired installs
> have been Cbus wired, however for all our wireless systems we have
> used Rako - they offer a good range of plate finishes in traditional
> styles suitable for UK back boxes. Wireless dimmers/relays are then
> located in the ceilings.
> They have a nice ipad interface amongst other ways of control.
>
> We have recently completed three installs of Rako wireless in 15,000+
> sq ft properties and all have performed faultlessly.
>
> List of some Rako items here : http://j.mp/gaLzEo - Can offer special
> UKHA discounts if something of interest.
>
>
>
>
> Regards
>
>
>
>
> Dean.
>
>
>

[Non-text portions of this message have been removed]

------------------------------------