RE: [Advert] FREE STUFF!

[Paul Gordon <paul_gordon@xxxxxxxxxxx>]

And another one bites the dust... FREE to anyone who wants to come
&
collect...

A 12U 19" rack, glass front door, lockable (with key), steel side
doors,
both removable and lockable (same key)
Open at the back
On heavy duty castors with rubber tyres, so it's easy to move about, and
won't scratch your floors...
Collection only from E11, and you WILL need a car big enough! - being 12U
it's what I'd call "half height" - i.e. it stands about a metre
tall

Going on Freecycle in a few days if no-one speaks up...

Paul G.

-----Original Message-----
From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On Behalf Of
Paul Gordon
Sent: 02 April 2012 13:03
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] [Advert] FREE STUFF!

And the next one, - free to anyone who wants to collect...

3U rackmount case, complete with 3-in-2 SATA drive caddy to fit 3 x
3.5"
SATA HDDs in the space of 2 5.25" bays
ATX PSU "fitted" - I say that in inverted commas, because this
case has a
non-standard PSU arrangement, - the original PSU that it came with failed,
but it doesn't have the mounting points for a standard ATX unit, so I had
to
just "accommodate" a standard ATX PSU within the space inside the
case that
would normally provide another 2 front-accessible 2.25" drive bays...
It's
worked well enough for me, but you do lose the additional front 5.25
bays...
Case is 54cm deep
Drop-down "flap" front panel cover
Rack ears for fixing into place in standard 19" rack (no slide rails
though)

Paul G

-----Original Message-----
From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On Behalf Of
Paul Gordon
Sent: 02 April 2012 12:02
To: ukha_d@xxxxxxx
Subject: [ukha_d] [Advert] FREE STUFF!

Free to anyone who wants to pop round to mine to collect. - first come
first
served.



4U rackmount case, complete with a "5-in-3" 3.5 HDD caddy (fits 5
SATA disks
in hot-plug caddies into the space of 3 drive bays)

With fitted 500W ATX PSU (takes standard ATX unit)

Case is 58cm deep

Still has 3 x 5.25" drive bays, plus 2 x 3.5" drive bays
available, all
fully accessible from the front even after the 5-in-3

Power switch & 2 case mounted USB sockets on the front panel

Drop-down "flap" front panel cover

Rack ears for fixing into place in standard 19" rack (no slide rails
though)

Would be good for a media server (which is in fact what I used it for until
recently)



There will be a couple more rack cases to follow soon. both 2U units if I
remember.



Due to the size & weight, I'm not even considering attempting to post
these
things, so they'd have to be collected from East London (E11)



Takers?



J



Paul G.



[Non-text portions of this message have been removed]



------------------------------------