[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Re: x10
I've been using AD10's for some years but have had loads of reliability
problems. Switches start off working but later go bad and get stuck ON. An
X10 OFF signal causes the bad AD10 to emit a weak click sound, rather than
the strong click of a working switch, and the LED and output stay ON.
My switches are only controlling the power feeds to heat and hot water
controllers so the loads should be very light and nothing that should
cause contacts to become welded, but that might be what is happening.
Has anyone else had any problems like this?
------------------------------------
<*> Join the Automated Home Forums
http://www.automatedhome.co.uk/vbulletin/
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|