[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
RE: Re: Best wire free alarm system with Z Wave connectivity?
--_000_DB5PR06MB130283F6E6AA2520B77ED5E6A8E90DB5PR06MB1302eurp_
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
Thanks for the links etc Steve :)
Still lots to think about - yes HV may still be good. Really depends what
I=
want to do in the new house as I won't have much hard wired cabling etc. I=
need to sit down and draw up a list of whaty functionality I want - essent=
ial, desirable and nice to have. Seems that after all these years, the old
=
controllers are still useful, even if HV is now obsolete. Need to try and
k=
eep elec costs down too as that's one of the reasons for down-sizing
house!=
!!
The Fibaro modules and HC2 are still high on the list though :)
I'm going to at least run Cat5e from the office (separate building over
dou=
ble garage) to living room and master bedroom. I'll need to get burial
grad=
e cat5e in ducting through a bit of garden and outside up the walls -
still=
need to think best strategy for that. Interior walls are all filled with s=
ound insulation too, so not sure how easy that will be to retro-fit. SUCH
a=
pain that developer won't allow anything at first fix!
Cat5e will be used for HDMI distribution as I already have a 4x4 HDBaseT
ma=
trix. Sky box and XBMC will probably live in the office in a suitable new
(=
although small) Node0. Need to put an extract fan in - my high flow 200mm
v=
ent axia fan just failed in my Node0 here and even with most of my servers
=
turned off (5 4U boxes!), it still gets very hot if the door is closed.
Sho=
ws what a difference even extracted hot air makes in a Node0. Would like
to=
get away from that and the associated cost. Already moved many services (e=
xchange etc) to the cloud - far cheaper too.
Cheers,
Paul.
From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx]
Sent: 26 April 2015 12:49
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] Re: Best wire free alarm system with Z Wave
connectiv=
ity?
Paul,
Just rethinking my reply to your question. The obvious suggestion I
forgot=
to mention is -
IR to HomeVision
Network connected HomeVision to Z-Wave / HC2
AKA HomeVision as your bridge. You could even have X10 remote to
HomeVisio=
n to Z-Wave etc.....
Any good?
Kind Regards,
_________________________________________
Steve Jones
From: ukha_d@xxxxxxx<mailto:ukha_d@xxxxxxx> [mailto:ukha_d@=
yahoogroups.com]
Sent: 26 April 2015 09:15
To: ukha_d@xxxxxxx<mailto:ukha_d@xxxxxxx>
Subject: RE: [ukha_d] Re: Best wire free alarm system with Z Wave
connectiv=
ity?
Hi Paul,
I'm not aware of an IR to Z-Wave Bridge. However you can control the HC2
v=
ia the API with HTTP commands. It is also possible to control IR devices
d=
irectly from the Home Center 2 with your phone, tablet or web page
interfac=
e, you will need a Z-Wave to IR Bridge though (unless your equipment can
ac=
cept TCP/IP commands then its HC2 direct to your equipment via WiFi/LAN).
This thread maybe of interest to you-
http://forum.fibaro.com/index.php?/topic/11839-ir-to-z-wave-home-center-2/#=
entry4923
Also have a look at this Vesternet guide
http://www.vesternet.com/resources/application-notes/apnt-66#.VTyX_CFViko
Also if it's any interest, I'm controlling my Media Center PC directly
from=
the HC2 using the MCEController TCP/IP software that is sat on my Media Ce=
nter PC. I have also used the built-in HC2 plug-in to control my Samsung
S=
mart TV. It would be easy to append scenes to a command from the virtual
re=
mote. i.e. When movie scene played lower screen, turn projector on dim
ligh=
ts to 20% etc.
What are you trying to achieve? Can you post a scenario?
Kind Regards,
_________________________________________
Steve Jones
From: ukha_d@xxxxxxx<mailto:ukha_d@xxxxxxx> [mailto:ukha_d@=
yahoogroups.com]
Sent: 25 April 2015 12:04
To: ukha_d@xxxxxxx<mailto:ukha_d@xxxxxxx>
Subject: Re: [ukha_d] Re: Best wire free alarm system with Z Wave
connectiv=
ity?
Steve,
Do you know of the HC2 can link to an IR system at all? I.e. Receive an IR
=
code via a module/gateway of some kind and then perform an action based on
=
that.
Cheers,
Paul.
--_000_DB5PR06MB130283F6E6AA2520B77ED5E6A8E90DB5PR06MB1302eurp_
Content-Type: text/html; charset=US-ASCII
Content-Transfer-Encoding: 7bit
<head>
<style type="text/css">
<!--
/* start of attachment style */
.ygrp-photo-title{
clear: both;
font-size: smaller;
height: 15px;
overflow: hidden;
text-align: center;
width: 75px;
}
div.ygrp-photo{
background-position: center;
background-repeat: no-repeat;
background-color: white;
border: 1px solid black;
height: 62px;
width: 62px;
}
div.photo-title
a,
div.photo-title a:active,
div.photo-title a:hover,
div.photo-title a:visited {
text-decoration: none;
}
div.attach-table div.attach-row {
clear: both;
}
div.attach-table div.attach-row div {
float: left;
/* margin: 2px;*/
}
p {
clear: both;
padding: 15px 0 3px 0;
overflow: hidden;
}
div.ygrp-file {
width: 30px;
valign: middle;
}
div.attach-table div.attach-row div div a {
text-decoration: none;
}
div.attach-table div.attach-row div div span {
font-weight: normal;
}
div.ygrp-file-title {
font-weight: bold;
}
/* end of attachment style */
-->
</style>
</head>
<html xmlns:v="urn:schemas-microsoft-com:vml"
xmlns:o="urn:schemas-microsoft-com:office:office"
xmlns:w="urn:schemas-microsoft-com:office:word" xmlns:m="http://schemas.microsoft.com/office/2004/12/omml";
xmlns="http://www.w3.org/TR/REC-html40";>
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=us-ascii">
<meta name="Generator" content="Microsoft Word 15
(filtered medium)">
<!--[if !mso]><style>v\:* {behavior:url(#default#VML);}
o\:* {behavior:url(#default#VML);}
w\:* {behavior:url(#default#VML);}
.shape {behavior:url(#default#VML);}
</style><![endif]--><style><!--
/* Font Definitions */
@font-face
{font-family:Wingdings;
panose-1:5 0 0 0 0 0 0 0 0 0;}
@font-face
{font-family:"Cambria Math";
panose-1:2 4 5 3 5 4 6 3 2 4;}
@font-face
{font-family:Calibri;
panose-1:2 15 5 2 2 2 4 3 2 4;}
@font-face
{font-family:Consolas;
panose-1:2 11 6 9 2 2 4 3 2 4;}
@font-face
{font-family:Verdana;
panose-1:2 11 6 4 3 5 4 4 2 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0cm;
margin-bottom:.0001pt;
font-size:12.0pt;
font-family:"Times New Roman",serif;}
a:link, span.MsoHyperlink
{mso-style-priority:99;
color:blue;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{mso-style-priority:99;
color:purple;
text-decoration:underline;}
p
{mso-style-priority:99;
mso-margin-top-alt:auto;
margin-right:0cm;
mso-margin-bottom-alt:auto;
margin-left:0cm;
font-size:12.0pt;
font-family:"Times New Roman",serif;}
code
{mso-style-priority:99;
font-family:"Courier New";}
pre
{mso-style-priority:99;
mso-style-link:"HTML Preformatted Char";
margin:0cm;
margin-bottom:.0001pt;
font-size:10.0pt;
font-family:"Courier New";}
tt
{mso-style-priority:99;
font-family:"Courier New";}
span.HTMLPreformattedChar
{mso-style-name:"HTML Preformatted Char";
mso-style-priority:99;
mso-style-link:"HTML Preformatted";
font-family:Consolas;}
p.attach, li.attach, div.attach
{mso-style-name:attach;
mso-style-priority:99;
mso-margin-top-alt:auto;
margin-right:0cm;
mso-margin-bottom-alt:auto;
margin-left:0cm;
font-size:9.0pt;
font-family:"Arial",sans-serif;}
p.bold, li.bold, div.bold
{mso-style-name:bold;
mso-style-priority:99;
mso-margin-top-alt:auto;
margin-right:0cm;
mso-margin-bottom-alt:auto;
margin-left:0cm;
font-size:10.0pt;
font-family:"Arial",sans-serif;
font-weight:bold;}
p.green, li.green, div.green
{mso-style-name:green;
mso-style-priority:99;
mso-margin-top-alt:auto;
margin-right:0cm;
mso-margin-bottom-alt:auto;
margin-left:0cm;
font-size:12.0pt;
font-family:"Times New Roman",serif;
color:#628C2A;}
p.replbq, li.replbq, div.replbq
{mso-style-name:replbq;
mso-style-priority:99;
margin:3.0pt;
font-size:12.0pt;
font-family:"Times New Roman",serif;}
p.ad, li.ad, div.ad
{mso-style-name:ad;
mso-style-priority:99;
mso-margin-top-alt:auto;
margin-right:0cm;
mso-margin-bottom-alt:auto;
margin-left:0cm;
font-size:12.0pt;
font-family:"Times New Roman",serif;}
p.underline, li.underline, div.underline
{mso-style-name:underline;
mso-style-priority:99;
mso-margin-top-alt:auto;
margin-right:0cm;
mso-margin-bottom-alt:auto;
margin-left:0cm;
font-size:12.0pt;
font-family:"Times New Roman",serif;}
p.ad1, li.ad1, div.ad1
{mso-style-name:ad1;
mso-style-priority:99;
mso-margin-top-alt:auto;
margin-right:0cm;
mso-margin-bottom-alt:auto;
margin-left:0cm;
font-size:12.0pt;
font-family:"Times New Roman",serif;}
p.ad2, li.ad2, div.ad2
{mso-style-name:ad2;
mso-style-priority:99;
mso-margin-top-alt:auto;
margin-right:0cm;
margin-bottom:7.5pt;
margin-left:0cm;
font-size:12.0pt;
font-family:"Times New Roman",serif;}
p.underline1, li.underline1, div.underline1
{mso-style-name:underline1;
mso-style-priority:99;
mso-margin-top-alt:auto;
margin-right:0cm;
mso-margin-bottom-alt:auto;
margin-left:0cm;
font-size:12.0pt;
font-family:"Times New Roman",serif;
text-decoration:underline;}
p.ygrp-photo-title, li.ygrp-photo-title, div.ygrp-photo-title
{mso-style-name:ygrp-photo-title;
mso-style-priority:99;
mso-margin-top-alt:auto;
margin-right:0cm;
mso-margin-bottom-alt:auto;
margin-left:0cm;
text-align:center;
font-size:10.0pt;
font-family:"Times New Roman",serif;}
span.yshortcuts
{mso-style-name:yshortcuts;}
span.yshortcuts1
{mso-style-name:yshortcuts1;
font-family:"Verdana",sans-serif;
font-weight:bold;}
span.yshortcuts2
{mso-style-name:yshortcuts2;
font-family:"Verdana",sans-serif;
font-weight:normal;}
span.EmailStyle35
{mso-style-type:personal;
font-family:"Arial",sans-serif;
color:#1F497D;}
span.EmailStyle36
{mso-style-type:personal-reply;
font-family:"Arial",sans-serif;
color:windowtext;}
.MsoChpDefault
{mso-style-type:export-only;
font-size:10.0pt;}
@page WordSection1
{size:612.0pt 792.0pt;
margin:72.0pt 72.0pt 72.0pt 72.0pt;}
div.WordSection1
{page:WordSection1;}
--></style><!--[if gte mso 9]><xml>
<o:shapedefaults v:ext="edit" spidmax="1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext="edit">
<o:idmap v:ext="edit" data="1" />
</o:shapelayout></xml><![endif]-->
</head>
<body bgcolor="white" lang="EN-GB"
link="blue" vlink="purple">
<!-- **begin egp html banner** -->
<br><br>
<!-- **end egp html banner** -->
<div class="WordSection1">
<p class="MsoNormal"><span
style="font-size:11.0pt;font-family:"Arial",sans-serif;mso-fareast-language:EN-US">Thanks
for the links etc Steve
</span><span
style="font-size:11.0pt;font-family:Wingdings;mso-fareast-language:EN-US">J</span><span
style="font-size:11.0pt;font-family:"Arial",sans-serif;mso-fareast-language:EN-US"><o:p></o:p></span></p>
<p class="MsoNormal"><span
style="font-size:11.0pt;font-family:"Arial",sans-serif;mso-fareast-language:EN-US"><o:p> </o:p></span></p>
<p class="MsoNormal"><span
style="font-size:11.0pt;font-family:"Arial",sans-serif;mso-fareast-language:EN-US">Still
lots to think about – yes HV may still be good. Really depends
what I want to do in the new house as I won’t have much hard
wired cabling etc.
I need to sit down and draw up a list of whaty functionality I want
– essential, desirable and nice to have. Seems that after all
these years, the old controllers are still useful, even if HV is now
obsolete. Need to try and keep elec costs down too as that’s
one of the reasons for down-sizing
house!!!<o:p></o:p></span></p>
<p class="MsoNormal"><span
style="font-size:11.0pt;font-family:"Arial",sans-serif;mso-fareast-language:EN-US"><o:p> </o:p></span></p>
<p class="MsoNormal"><span
style="font-size:11.0pt;font-family:"Arial",sans-serif;mso-fareast-language:EN-US">The
Fibaro modules and HC2 are still high on the list though
</span><span
style="font-size:11.0pt;font-family:Wingdings;mso-fareast-language:EN-US">J</span><span
style="font-size:11.0pt;font-family:"Arial",sans-serif;mso-fareast-language:EN-US"><o:p></o:p></span></p>
<p class="MsoNormal"><span
style="font-size:11.0pt;font-family:"Arial",sans-serif;mso-fareast-language:EN-US"><o:p> </o:p></span></p>
<p class="MsoNormal"><span
style="font-size:11.0pt;font-family:"Arial",sans-serif;mso-fareast-language:EN-US">I’m
going to at least run Cat5e from the office (separate building over double
garage) to living room and master bedroom. I’ll need to get
burial grade
cat5e in ducting through a bit of garden and outside up the walls
– still need to think best strategy for that. Interior walls are
all filled with sound insulation too, so not sure how easy that will be to
retro-fit. SUCH a pain that developer won’t allow
anything at first fix!<o:p></o:p></span></p>
<p class="MsoNormal"><span
style="font-size:11.0pt;font-family:"Arial",sans-serif;mso-fareast-language:EN-US"><o:p> </o:p></span></p>
<p class="MsoNormal"><span
style="font-size:11.0pt;font-family:"Arial",sans-serif;mso-fareast-language:EN-US">Cat5e
will be used for HDMI distribution as I already have a 4x4 HDBaseT matrix.
Sky box and XBMC will probably live in the office in a suitable new
(although small) Node0. Need to put an extract fan in – my high
flow 200mm vent axia fan just failed in my Node0 here and even with most of
my servers turned off (5 4U boxes!), it still gets very hot if the door is
closed. Shows what a difference even extracted
hot air makes in a Node0. Would like to get away from that and the
associated cost. Already moved many services (exchange etc) to the cloud
– far cheaper too.<o:p></o:p></span></p>
<p class="MsoNormal"><span
style="font-size:11.0pt;font-family:"Arial",sans-serif;mso-fareast-language:EN-US"><o:p> </o:p></span></p>
<p class="MsoNormal"><span
style="font-size:11.0pt;font-family:"Arial",sans-serif;mso-fareast-language:EN-US">Cheers,<o:p></o:p></span></p>
<div>
<p class="MsoNormal"><span
style="font-size:11.0pt;font-family:"Calibri",sans-serif"><o:p> </o:p></span></p>
<p class="MsoNormal"><span
style="font-size:11.0pt;font-family:"Calibri",sans-serif">Paul.<o:p></o:p></span></p>
</div>
<p class="MsoNormal"><span
style="font-size:11.0pt;font-family:"Arial",sans-serif;mso-fareast-language:EN-US"><o:p> </o:p></span></p>
<div>
<div style="border:none;border-top:solid #E1E1E1
1.0pt;padding:3.0pt 0cm 0cm 0cm">
<p class="MsoNormal"><b><span
lang="EN-US"
style="font-size:11.0pt;font-family:"Calibri",sans-serif">From:</span></b><span
lang="EN-US"
style="font-size:11.0pt;font-family:"Calibri",sans-serif">
ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx]
<br>
<b>Sent:</b> 26 April 2015 12:49<br>
<b>To:</b> ukha_d@xxxxxxx<br>
<b>Subject:</b> RE: [ukha_d] Re: Best wire free alarm system
with Z Wave connectivity?<o:p></o:p></span></p>
</div>
</div>
<p
class="MsoNormal"><o:p> </o:p></p>
<p class="MsoNormal"
style="margin-bottom:12.0pt"><br>
<br>
<o:p></o:p></p>
<p class="MsoNormal"><a
name="_MailEndCompose"><span
style="font-family:"Arial",sans-serif;color:#1F497D;mso-fareast-language:EN-US">Paul,</span></a><span
style="font-family:"Arial",sans-serif;color:#1F497D;mso-fareast-language:EN-US"><o:p></o:p></span></p>
<p class="MsoNormal"><span
style="font-family:"Arial",sans-serif;color:#1F497D;mso-fareast-language:EN-US"><o:p> </o:p></span></p>
<p class="MsoNormal"><span
style="font-family:"Arial",sans-serif;color:#1F497D;mso-fareast-language:EN-US">Just
rethinking my reply to your question. The obvious suggestion I
forgot to mention is
–<o:p></o:p></span></p>
<p class="MsoNormal"><span
style="font-family:"Arial",sans-serif;color:#1F497D;mso-fareast-language:EN-US"><o:p> </o:p></span></p>
<p class="MsoNormal"><span
style="font-family:"Arial",sans-serif;color:#1F497D;mso-fareast-language:EN-US">IR
to HomeVision<o:p></o:p></span></p>
<p class="MsoNormal"><span
style="font-family:"Arial",sans-serif;color:#1F497D;mso-fareast-language:EN-US"><o:p> </o:p></span></p>
<p class="MsoNormal"><span
style="font-family:"Arial",sans-serif;color:#1F497D;mso-fareast-language:EN-US">Network
connected HomeVision to Z-Wave /
HC2<o:p></o:p></span></p>
<p class="MsoNormal"><span
style="font-family:"Arial",sans-serif;color:#1F497D;mso-fareast-language:EN-US"><o:p> </o:p></span></p>
<p class="MsoNormal"><span
style="font-family:"Arial",sans-serif;color:#1F497D;mso-fareast-language:EN-US">AKA
HomeVision as your bridge. You could even have X10 remote to
HomeVision to Z-Wave
etc.….<o:p></o:p></span></p>
<p class="MsoNormal"><span
style="font-family:"Arial",sans-serif;color:#1F497D;mso-fareast-language:EN-US"><o:p> </o:p></span></p>
<div>
<p class="MsoNormal"><span
style="font-family:"Arial",sans-serif;color:#1F497D">Any
good?<o:p></o:p></span></p>
<p class="MsoNormal"><span
style="font-family:"Arial",sans-serif;color:#1F497D"><o:p> </o:p></span></p>
<p class="MsoNormal"
style="margin-bottom:12.0pt"><span
style="font-family:"Arial",sans-serif;color:#1F497D"> <br>
<br>
Kind Regards, <br>
_________________________________________ <br>
Steve Jones<o:p></o:p></span></p>
</div>
<p class="MsoNormal"><span
style="font-family:"Arial",sans-serif;color:#1F497D;mso-fareast-language:EN-US"><o:p> </o:p></span></p>
<div>
<div style="border:none;border-top:solid #E1E1E1
1.0pt;padding:3.0pt 0cm 0cm 0cm">
<p class="MsoNormal"><b><span
lang="EN-US"
style="font-size:11.0pt;font-family:"Calibri",sans-serif">From:</span></b><span
lang="EN-US"
style="font-size:11.0pt;font-family:"Calibri",sans-serif">
<a href="mailto:ukha_d@xxxxxxx";>ukha_d@xxxxxxx</a>
[<a href="mailto:ukha_d@xxxxxxx";>mailto:ukha_d@xxxxxxx</a>]
<br>
<b>Sent:</b> 26 April 2015 09:15<br>
<b>To:</b> <a href="mailto:ukha_d@xxxxxxx";>ukha_d@xxxxxxx</a><br>
<b>Subject:</b> RE: [ukha_d] Re: Best wire free alarm system
with Z Wave connectivity?<o:p></o:p></span></p>
</div>
</div>
<p
class="MsoNormal"><o:p> </o:p></p>
<p class="MsoNormal">
<o:p></o:p></p>
<div id="ygrp-mlmsg">
<div id="ygrp-msg">
<div id="ygrp-text">
<div>
<p class="MsoNormal"
style="mso-margin-top-alt:auto;mso-margin-bottom-alt:auto"><span
style="color:#1F497D">Hi
Paul,</span><o:p></o:p></p>
<p class="MsoNormal"
style="mso-margin-top-alt:auto;mso-margin-bottom-alt:auto"><span
style="color:#1F497D"> </span><o:p></o:p></p>
<p class="MsoNormal"
style="mso-margin-top-alt:auto;mso-margin-bottom-alt:auto"><span
style="color:#1F497D">I’m not aware of an IR to
Z-Wave Bridge. However you can control the HC2 via the API with
HTTP commands. It is also possible to control IR devices
directly from the Home Center 2 with your phone, tablet or web page
interface, you will need a Z-Wave to IR Bridge though (unless your
equipment can accept TCP/IP commands then its HC2 direct to your equipment
via WiFi/LAN).</span><o:p></o:p></p>
<p class="MsoNormal"
style="mso-margin-top-alt:auto;mso-margin-bottom-alt:auto"><span
style="color:#1F497D"> </span><o:p></o:p></p>
<p class="MsoNormal"
style="mso-margin-top-alt:auto;mso-margin-bottom-alt:auto"><span
style="color:#1F497D">This thread maybe of interest to
you-</span><o:p></o:p></p>
<p class="MsoNormal"
style="mso-margin-top-alt:auto;mso-margin-bottom-alt:auto"><a
href="http://forum.fibaro.com/index.php?/topic/11839-ir-to-z-wave-home-center-2/#entry4923";>http://forum.fibaro.com/index.php?/topic/11839-ir-to-z-wave-home-center-2/#entry4923</a><o:p></o:p></p>
<p class="MsoNormal"
style="mso-margin-top-alt:auto;mso-margin-bottom-alt:auto"><span
style="color:#1F497D"> </span><o:p></o:p></p>
<p class="MsoNormal"
style="mso-margin-top-alt:auto;mso-margin-bottom-alt:auto"><span
style="color:#1F497D">Also have a look at this Vesternet
guide</span><o:p></o:p></p>
<p class="MsoNormal"
style="mso-margin-top-alt:auto;mso-margin-bottom-alt:auto"><a
href="http://www.vesternet.com/resources/application-notes/apnt-66#.VTyX_CFViko";>http://www.vesternet.com/resources/application-notes/apnt-66#.VTyX_CFViko</a><o:p></o:p></p>
<p class="MsoNormal"
style="mso-margin-top-alt:auto;mso-margin-bottom-alt:auto"><span
style="color:#1F497D"> </span><o:p></o:p></p>
<p class="MsoNormal"
style="mso-margin-top-alt:auto;mso-margin-bottom-alt:auto"><span
style="color:#1F497D">Also if it’s any interest,
I’m controlling my Media Center PC directly from the HC2 using
the MCEController TCP/IP software that is sat on my Media Center
PC. I have also used the built-in HC2 plug-in to control my
Samsung Smart TV. It would be easy to append scenes to a command from the
virtual remote. i.e. When movie scene played lower screen, turn projector
on dim lights to 20% etc.</span><o:p></o:p></p>
<p class="MsoNormal"
style="mso-margin-top-alt:auto;mso-margin-bottom-alt:auto"><span
style="color:#1F497D"> </span><o:p></o:p></p>
<div>
<p class="MsoNormal"
style="mso-margin-top-alt:auto;mso-margin-bottom-alt:auto"><span
style="color:#1F497D">What are you trying to
achieve? Can you post a
scenario?</span><o:p></o:p></p>
<p class="MsoNormal"
style="mso-margin-top-alt:auto;margin-bottom:12.0pt"><span
style="color:#1F497D"> <br>
<br>
<br>
<br>
Kind Regards, <br>
_________________________________________ <br>
Steve Jones</span><o:p></o:p></p>
</div>
<p class="MsoNormal"
style="mso-margin-top-alt:auto;mso-margin-bottom-alt:auto"><span
style="color:#1F497D"> </span><o:p></o:p></p>
<div>
<div style="border:none;border-top:solid #E1E1E1
1.0pt;padding:3.0pt 0cm 0cm 0cm">
<p class="MsoNormal"
style="mso-margin-top-alt:auto;mso-margin-bottom-alt:auto"><b><span
lang="EN-US"
style="font-size:11.0pt">From:</span></b><span
lang="EN-US" style="font-size:11.0pt">
<a href="mailto:ukha_d@xxxxxxx";>ukha_d@xxxxxxx</a>
[<a href="mailto:ukha_d@xxxxxxx";>mailto:ukha_d@xxxxxxx</a>]
<br>
<b>Sent:</b> 25 April 2015 12:04<br>
<b>To:</b> <a href="mailto:ukha_d@xxxxxxx";>ukha_d@xxxxxxx</a><br>
<b>Subject:</b> Re: [ukha_d] Re: Best wire free alarm system
with Z Wave connectivity?</span><o:p></o:p></p>
</div>
</div>
<p class="MsoNormal"
style="mso-margin-top-alt:auto;mso-margin-bottom-alt:auto"> <o:p></o:p></p>
<p class="MsoNormal"
style="mso-margin-top-alt:auto;mso-margin-bottom-alt:auto">
<o:p></o:p></p>
<div id="ygrp-mlmsg">
<div id="ygrp-msg">
<div id="ygrp-text">
<div>
<p class="MsoNormal"
style="mso-margin-top-alt:auto;mso-margin-bottom-alt:auto">Steve,<o:p></o:p></p>
</div>
<div>
<p class="MsoNormal"
style="mso-margin-top-alt:auto;mso-margin-bottom-alt:auto"> <o:p></o:p></p>
</div>
<div>
<p class="MsoNormal"
style="mso-margin-top-alt:auto;mso-margin-bottom-alt:auto">Do
you know of the HC2 can link to an IR system at all? I.e. Receive an IR
code via a module/gateway of some kind and then perform an action based on
that. <o:p></o:p></p>
</div>
<div>
<p class="MsoNormal"
style="mso-margin-top-alt:auto;mso-margin-bottom-alt:auto"> <o:p></o:p></p>
</div>
<div>
<p class="MsoNormal"
style="mso-margin-top-alt:auto;margin-bottom:12.0pt">Cheers,<o:p></o:p></p>
<div>
<p class="MsoNormal"
style="mso-margin-top-alt:auto;mso-margin-bottom-alt:auto">Paul.<o:p></o:p></p>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
<div>
<p class="MsoNormal"><span
style="color:white"><o:p> </o:p></span></p>
</div>
</div>
<p class="MsoNormal"
style="margin-bottom:12.0pt"><br>
<br>
<o:p></o:p></p>
<div>
<p class="MsoNormal"><span
style="color:white"><o:p></o:p></span></p>
</div>
<p class="MsoNormal"><img border="0"
width="1" height="1" id="_x0000_i1027"
src="http://s.bl-1.com/jyb1WxL.gif";
alt=" "><o:p></o:p></p>
</div>
<!-- **begin egp html banner** -->
<br>
<br>
<!-- **end egp html banner** -->
<div width="1" style="color: white; clear:
both;"/>__._,_.___</div>
<div id="fromDMARC" style="clear:both; margin-top:
10px;">
<hr style="height:2px ; border-width:0; color:#E3E3E3;
background-color:#E3E3E3;">
Posted by: Paul Gale <paul@xxxxxxx> <hr
style="height:2px ; border-width:0; color:#E3E3E3;
background-color:#E3E3E3;">
</div>
<!-- Start Recommendations -->
<!-- End Recommendations -->
<!-- **begin egp html banner** -->
<br><br>
<tt>
<*> Join the Automated Home Forums<BR>
<a href="http://www.automatedhome.co.uk/vbulletin/";>http://www.automatedhome.co.uk/vbulletin/</a><BR>
<BR>
<*> UKHA_D Mailing list in association with:<BR>
<a href="http://www.automatedhome.co.uk";>http://www.automatedhome.co.uk</a><BR>
<BR>
<BR>
</tt>
<br><br>
<!-- **end egp html banner** -->
<!-- **begin egp html banner** -->
<img src="http://geo.yahoo.com/serv?s=97476590/grpId=1109639/grpspId=1705041992/msgId=165280/stime=1430123908";
width="1" height="1"> <br>
<!-- **end egp html banner** -->
<!-- **begin egp html banner** -->
<br>
<!-- **begin egp html banner** -->
<div id="ygrp-vital" style="background-color: #f2f2f2;
font-family: Verdana; font-size: 10px; margin-bottom: 10px; padding:
10px;">
<span id="vithd" style="font-weight: bold; color: #333;
text-transform: uppercase; "><a href="https://groups.yahoo.com/neo/groups/ukha_d/info;_ylc=X3oDMTJlZGxpMmJrBF9TAzk3MzU5NzE0BGdycElkAzExMDk2MzkEZ3Jwc3BJZAMxNzA1MDQxOTkyBHNlYwN2dGwEc2xrA3ZnaHAEc3RpbWUDMTQzMDEyMzkwOA--";
style="text-decoration: none;">Visit Your
Group</a></span>
<ul style="list-style-type: none; margin: 0; padding: 0; display:
inline;">
</ul>
</div>
<div id="ft" style="font-family: Arial; font-size: 11px;
margin-top: 5px; padding: 0 2px 0 0; clear: both;">
<a href="https://groups.yahoo.com/neo;_ylc=X3oDMTJkdjR2OTBkBF9TAzk3NDc2NTkwBGdycElkAzExMDk2MzkEZ3Jwc3BJZAMxNzA1MDQxOTkyBHNlYwNmdHIEc2xrA2dmcARzdGltZQMxNDMwMTIzOTA4";
style="float: left;"><img src="http://l.yimg.com/ru/static/images/yg/img/email/new_logo/logo-groups-137x15.png";
height="15" width="137" alt="Yahoo! Groups"
style="border: 0;"/></a>
<div style="color: #747575; float: right;"> •
<a href="https://info.yahoo.com/privacy/us/yahoo/groups/details.html";
style="text-decoration: none;">Privacy</a> •
<a href="mailto:ukha_d-unsubscribe@xxxxxxx?subject=Unsubscribe";
style="text-decoration: none;">Unsubscribe</a>
• <a href="https://info.yahoo.com/legal/us/yahoo/utos/terms/";
style="text-decoration: none;">Terms of Use</a>
</div>
</div>
<!-- **end egp html banner** -->
</div> <!-- ygrp-msg -->
<br>
<!-- **end egp html banner** -->
<div style="color: white; clear:
both;"/>__,_._,___</div>
</body>
</html>
--_000_DB5PR06MB130283F6E6AA2520B77ED5E6A8E90DB5PR06MB1302eurp_--
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|
![http://s.bl-1.com/jyb1WxL.gif"](http://s.bl-1.com/jyb1WxL.gif"){kind=link}
![http://l.yimg.com/ru/static/images/yg/img/email/new_logo/logo-groups-137x15.png"](http://l.yimg.com/ru/static/images/yg/img/email/new_logo/logo-groups-137x15.png"){kind=link}