[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
xAP-CM12U under Windows 2000....
- Subject: xAP-CM12U under Windows 2000....
- From: mark_harrison_uk2
- Date: Thu, 14 Aug 2003 15:49:00 +0000
Just a quick application note.
I have Patrick's X10 connector working on a new PC. Like last time,
it was tricky. Unlike last time, I took better note of what I was
doing.
The trick is to be VERY careful with the port settings BEFORE you
start the xAP software.
The serial port in question needs to be set as:
BPS: 4800
Data: 8
Parity: None
Stop Bits: 1
Flow Control: HARDWARE
It's the last one that gave me all the grief. 4800,8,N,1 is fairly
common, and I'd got that right... but flow control - hardware isn't
wildly normal :-)
Regards,
Mark
xAP_Automation Main Index |
xAP_Automation Thread Index |
xAP_Automation Home |
Archives Home
|