RE: Re: Now trying xAP Desktop.... but not displaying any info?

["Sullivan, Glenn" <gsullivan@xxxxxxxxxxxxxx>]

There's your problem... A network card, with nothing connected to it.

xAP requires a running network of some type.  Even if it is the MS
loopback adapter, you need an interface running.

Can you plug the card into a hub or something?

The other option would be to make a loopback "cable" but that
might
cause you more grief that plugging into a $10 hub...


Glenn Sullivan, MCSE+I MCDBA
David Clark Company Inc.
-----Original Message-----
From: xap_automation@xxxxxxx
[mailto:xap_automation@xxxxxxx] On
Behalf Of Gary
Sent: Friday, December 02, 2005 1:51 PM
To: xap_automation@xxxxxxx
Subject: [xap_automation] Re: Now trying xAP Desktop.... but not
displaying any info?

--- In xap_automation@xxxxxxx, Kevin Hawkins <lists@u...> wrote:
>
> Gary - as Glenn says the symptoms you describe indicate almost
> certainly  that there is no hub running on the the machine you are
> using.   The very first xAP application that you launch on your PC
must
> be a xAP hub (or an application that provides hub service for example
> xAP Viewer).  You can tell which application is sitting in the hub
> slot because it will be sending heartbeats with a port=3639 line in
them.
> (In your case to see these messages you would have to run Viewer on a
> different PC as it will be 'deaf' on the same machine due to the hub
> issue).   I am guessing you have a xAP application launched before the

> hub started, perhaps you have installed a xAP application starting as
> a service ? Take a peek for any services beginning xAP....

No xaps running as a service


I have stopped it crashing it conflicts with macro magic
http://www.iolo.com/mm/index.cfm

if this is turned of then the About problem no longer crashing.
Trouble is i use it a lot so can't do without it, but for now just to
get xap working i will.



>
> Now if xAP Hub is broken and you can't run it (as it might be due to
> that arith error) try quitting xAP hub and launching xAP Viewer as the

> very **first**  xAP application. It will act as a hub and should say
xFX
yes it has that in title.


> Hub in its title bar. If it just says 'Viewer' then something is still

> launching before it and grabbing the xAP port (3639)
>
> Also - one other possibility - do you have multiple network interfaces

> in use on this machine

No



Just to mention i do have network card but nothing connected to it i
assume thats ok?

What do i reqiure to send xap messages so that i can see them on the
hub or viewer?

Regards


Gary

>
> K
>
>
> Gary wrote:
> > As i am not allowed to put photos there, as not a member of that
group.
> >
> > So uploaded to this group in the photo section its called
"gary"
> >
> > I have shown 3 apps running news, thats says not getting xap
messages,
> > Desktop thats not showing anything and xap hub mentioning
arithmetic
> > problem at base of app.
> >
> >
> > hope this helps
> >
> > i do have .net framework 1.1 and 2 running (other software needs
.net
> > framework 2.0) could this be problem?
> >
> > Regards
> >
> >
> > Gary
> >
> >
> >
> > -- In xap_automation@xxxxxxx, "Sullivan, Glenn"
> > <gsullivan@d...> wrote:
> >
> >> Sure:
> >> http://tinyurl.com/2opqm
> >>
> >>
> >> Glenn Sullivan, MCSE+I MCDBA
> >> David Clark Company Inc.
> >> -----Original Message-----
> >> From: xap_automation@xxxxxxx
> >> [mailto:xap_automation@xxxxxxx] On
Behalf Of Gary
> >> Sent: Friday, December 02, 2005 8:12 AM
> >> To: xap_automation@xxxxxxx
> >> Subject: [xap_automation] Re: Now trying xAP Desktop.... but
not
> >> displaying any info?
> >>
> >> --- In xap_automation@xxxxxxx, "Sullivan, Glenn"
> >> <gsullivan@d...> wrote:
> >>
> >>> So you see nothing at all in the Viewer window?
> >>>
> >>> Curious...
> >>>
> >>> XP Firewall turned on?
> >>>
> >> Yes thats on and i allow it to let all xAP devices access the
internet
> >> when it asks.
> >>
> >> Is there a way that i can upload a pic of Hub etc as may
help?
> >>
> >> Regards
> >>
> >>
> >> Gary
> >>
> >>> Glenn Sullivan, MCSE+I MCDBA
> >>> David Clark Company Inc.
> >>> -----Original Message-----
> >>> From: xap_automation@xxxxxxx
> >>> [mailto:xap_automation@xxxxxxx] On
Behalf Of Gary
> >>> Sent: Friday, December 02, 2005 8:07 AM
> >>> To: xap_automation@xxxxxxx
> >>> Subject: [xap_automation] Re: Now trying xAP Desktop....
but not
> >>> displaying any info?
> >>>
> >>> Thanks glenn,
> >>>
> >>> That is the order i start in as well... but still no go?
> >>>
> >>> Regards
> >>>
> >>>
> >>> Gary
> >>>
> >>>
> >>> --- In xap_automation@xxxxxxx, "Sullivan,
Glenn"
> >>> <gsullivan@d...> wrote:
> >>>
> >>>> You have to make sure that you are starting things in
the right
> >>>>
> >> order.
> >>
> >>>> Hub goes first.  Then everything else.
> >>>>
> >>>> I usually start viewer second when I'm testing, so I
can catch
the
> >>>> initial heartbeat messages of the rest of the
xAPplications on
the
> >>>> machine as they start up.
> >>>>
> >>>>
> >>>> Glenn Sullivan, MCSE+I MCDBA
> >>>> David Clark Company Inc.
> >>>> -----Original Message-----
> >>>> From: xap_automation@xxxxxxx
> >>>> [mailto:xap_automation@xxxxxxx] On
Behalf Of Gary
> >>>> Sent: Friday, December 02, 2005 6:18 AM
> >>>> To: xap_automation@xxxxxxx
> >>>> Subject: [xap_automation] Re: Now trying xAP
Desktop.... but not
> >>>> displaying any info?
> >>>>
> >>>> hi,
> >>>>
> >>>> I think i have not installed something?
> >>>>
> >>>> I have HubGUI.exe running and xAP Viewer + News + xAP
Desktop
> >>>>
> >>>>
> >>>> In HubGUI.exe and xAP Viewer nothing is showing at
all just the
same
> >>>>
> >>>> as when you 1st load it?
> >>>>
> >>>>
> >>>> When i goto About in Hubgui the program crashes and
gives
following
> >>>> details
> >>>>
> >>>> "See the end of this message for details on
invoking just-in-time
> >>>> (JIT) debugging instead of this dialog box.
> >>>>
> >>>> ************** Exception Text **************
> >>>> System.ArithmeticException: Overflow or underflow in
the
arithmetic
> >>>> operation.
> >>>>    at System.Drawing.Font.Initialize(FontFamily
family, Single
> >>>> emSize,
> >>>>
> >>>> FontStyle style, GraphicsUnit unit, Byte gdiCharSet,
Boolean
> >>>> gdiVerticalFont)
> >>>>    at System.Drawing.Font..ctor(String familyName,
Single emSize,

> >>>> FontStyle style, GraphicsUnit unit, Byte gdiCharSet)
> >>>>    at
KCS.xAP.Framework.Windows.About.InitializeComponent()
> >>>>    at KCS.xAP.Framework.Windows.About..ctor()
> >>>>    at
> >>>>
KCS.xAP.Applications.Hub.MainForm.menuHelpAbout_Activate(Object
> >>>> sender, EventArgs e)
> >>>>    at TD.SandBar.ButtonItemBase.OnActivate()
> >>>>    at q.b(TopLevelMenuItemBase A_0, Boolean A_1,
Boolean A_2,
Point
> >>>>
> >>> A_3)
> >>>
> >>>>    at TD.SandBar.TopLevelMenuItemBase.Show()
> >>>>    at TD.SandBar.MenuBar.OnItemPush(ToolbarItemBase
item, Point
> >>>> position)
> >>>>    at TD.SandBar.ToolBar.OnMouseDown(MouseEventArgs
e)
> >>>>    at
System.Windows.Forms.Control.WmMouseDown(Message& m,
> >>>> MouseButtons button, Int32 clicks)
> >>>>    at
System.Windows.Forms.Control.WndProc(Message& m)
> >>>>    at TD.SandBar.ToolBar.WndProc(Message& m)
> >>>>    at
System.Windows.Forms.ControlNativeWindow.OnMessage(Message& m)
> >>>>    at
System.Windows.Forms.ControlNativeWindow.WndProc(Message&
m)
> >>>>    at
System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd,
Int32
> >>>> msg, IntPtr wparam, IntPtr lparam)
> >>>>
> >>>>
> >>>> ************** Loaded Assemblies **************
mscorlib
> >>>>     Assembly Version: 1.0.5000.0
> >>>>     Win32 Version: 1.1.4322.573
> >>>>     CodeBase:
> >>>>
file:///h:/windows/microsoft.net/framework/v1.1.4322/mscorlib.dll
> >>>> ----------------------------------------
> >>>> HubGUI
> >>>>     Assembly Version: 1.2.1.6
> >>>>     Win32 Version: 1.2.1.6
> >>>>     CodeBase:
file:///H:/Program%20Files/xAP%20Gui/HubGUI.exe
> >>>> ----------------------------------------
> >>>> KCS.Utilities
> >>>>     Assembly Version: 1.1.2.1
> >>>>     Win32 Version: 1.1.2.1
> >>>>     CodeBase:
file:///H:/Program%20Files/xAP%20Gui/KCS.Utilities.DLL
> >>>> ----------------------------------------
> >>>> xAPMessage
> >>>>     Assembly Version: 1.2.9.12
> >>>>     Win32 Version: 1.2.9.12
> >>>>     CodeBase:
file:///H:/Program%20Files/xAP%20Gui/xAPMessage.DLL
> >>>> ----------------------------------------
> >>>> System.Windows.Forms
> >>>>     Assembly Version: 1.0.5000.0
> >>>>     Win32 Version: 1.1.4322.573
> >>>>     CodeBase:
> >>>>
file:///h:/windows/assembly/gac/system.windows.forms/1.0.5000.0__b77
> >>>> a5
> >>>> c5
> >>>> 61934e089/system.windows.forms.dll
> >>>> ----------------------------------------
> >>>> System
> >>>>     Assembly Version: 1.0.5000.0
> >>>>     Win32 Version: 1.1.4322.573
> >>>>     CodeBase:
> >>>>
file:///h:/windows/assembly/gac/system/1.0.5000.0__b77a5c561934e089/
> >>>> sy
> >>>> st
> >>>> em.dll
> >>>> ----------------------------------------
> >>>> xAPTransport
> >>>>     Assembly Version: 1.2.9.2
> >>>>     Win32 Version: 1.2.9.2
> >>>>     CodeBase:
file:///H:/Program%20Files/xAP%20Gui/xAPTransport.DLL
> >>>> ----------------------------------------
> >>>> xAPUI
> >>>>     Assembly Version: 1.2.0.4
> >>>>     Win32 Version: 1.2.0.4
> >>>>     CodeBase:
file:///H:/Program%20Files/xAP%20Gui/xAPUI.DLL
> >>>> ----------------------------------------
> >>>> System.Drawing
> >>>>     Assembly Version: 1.0.5000.0
> >>>>     Win32 Version: 1.1.4322.573
> >>>>     CodeBase:
> >>>>
file:///h:/windows/assembly/gac/system.drawing/1.0.5000.0__b03f5f7f1
> >>>> 1d
> >>>> 50
> >>>> a3a/system.drawing.dll
> >>>> ----------------------------------------
> >>>> SandBar
> >>>>     Assembly Version: 1.0.10.0
> >>>>     Win32 Version: 1.0.10.0
> >>>>     CodeBase:
file:///H:/Program%20Files/xAP%20Gui/SandBar.DLL
> >>>> ----------------------------------------
> >>>> System.Xml
> >>>>     Assembly Version: 1.0.5000.0
> >>>>     Win32 Version: 1.1.4322.573
> >>>>     CodeBase:
> >>>>
file:///h:/windows/assembly/gac/system.xml/1.0.5000.0__b77a5c561934e
> >>>> 08
> >>>> 9/
> >>>> system.xml.dll
> >>>> ----------------------------------------
> >>>>
> >>>> ************** JIT Debugging ************** To enable
just in
time
> >>>> (JIT) debugging, the config file for this application
or machine
> >>>> (machine.config) must have the jitDebugging value set
in the
> >>>> system.windows.forms section.
> >>>> The application must also be compiled with debugging
enabled.
> >>>>
> >>>> For example:
> >>>>
> >>>> <configuration>
> >>>>     <system.windows.forms
jitDebugging="true" /> </configuration>
> >>>>
> >>>> When JIT debugging is enabled, any unhandled
exception will be
sent
> >>>> to
> >>>>
> >>>> the JIT debugger registered on the machine rather
than being
handled
> >>>>
> >>>> by this dialog.
> >>>> "
> >>>>
> >>>>
> >>>> Hopefully this helps you?
> >>>>
> >>>>
> >>>> Im running XP Pro and AVG anti virus and XP firewall
> >>>>
> >>>> Regards
> >>>>
> >>>>
> >>>> Gary
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>> ------------------------ Yahoo! Groups Sponsor
> >>>> --------------------~--> Get Bzzzy! (real tools to
help you find
a
> >>>> job). Welcome to the Sweet Life.
> >>>> http://us.click.yahoo.com/KIlPFB/vlQLAA/TtwFAA/dpFolB/TM
> >>>>
--------------------------------------------------------------------
> >>>> ~-
> >>>>
> >>>>
> >>>> Yahoo! Groups Links
> >>>>
> >>>>
> >>>
> >>>
> >>>
> >>>
> >>> ------------------------ Yahoo! Groups Sponsor
> >>> --------------------~-->
> >>> 1.2 million kids a year are victims of human trafficking.
Stop
> >>>
> >> slavery.
> >>
> >>> http://us.click.yahoo.com/.QUssC/izNLAA/TtwFAA/dpFolB/TM
> >>>
--------------------------------------------------------------------~-
> >>>
> >>>
> >>> Yahoo! Groups Links
> >>>
> >>>
> >>
> >>
> >>
> >>
> >> ------------------------ Yahoo! Groups Sponsor
--------------------~-->
> >> Get Bzzzy! (real tools to help you find a job). Welcome to
the
Sweet
> >> Life.
> >> http://us.click.yahoo.com/KIlPFB/vlQLAA/TtwFAA/dpFolB/TM
> >>
--------------------------------------------------------------------~->
> >>
> >>
> >> Yahoo! Groups Links
> >>
> >>
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> >
> >
>