RE: X10 Connector, Homeseer and All Lights off

["Edward Pearson" <edward.mailgroup@xxxxxxxxxxxxxxxx>]

------=_NextPart_000_004A_01C5044C.756FBD50
Content-Type: text/plain;
charset="US-ASCII"
Content-Transfer-Encoding: 7bit

Hi Jeremy,

can you give some more detail on the All Units/Lights problem please then I
can try to replicate it.
(this is assuming that you're using the connector from www.erspearson.com -
there is more than one flavour).

In the first instance it would be easiest for me to fix it - but if you
have
a copy of MS Visual Studio C# then I could send you the project code and
you
could take a look.

There are no plans to remove support for the X10 schema from the connector
-
it will always be useful to drop down to that level in some circumstances
(eg, to be able to use a non-standard device).

The next major release, not imminent, will separate the configuration from
the connector so you'll be able to configure it (and other xAP
applications)
from any computer on the network.

Edward

_____

From: Jeremy [mailto:jeremy@xxxxxxx]
Sent: 27 January 2005 00:06
To: xap_automation@xxxxxxx
Subject: [xap_automation] X10 Connector, Homeseer and All Lights off




Hi all,

I am using the X10 connector on a machine and Homeseer with the xAP
plugin elsewhere.

I can send and receive the on/off codes I need but there seems to be
some incompatibility with Dim/Bright and All Units or All Lights
on/off

My questions are these:
Which app (I assume x10 connector) is at fault, and how can I fix it?
Will the raw x10 commands always be part of the spec?
(I am writing to X10 codes and do not want to be managing device
names on the X10 connector slave PC)

TIA

J








_____