Re: xAPTel not seeing outgoing calls

[Kevin Hawkins <lists@xxxxxxxxxxxxxxxxx>]

OOOPS  speed should be 1200 baud not 2400 baud !

-also I assume you are using DTMF (tone) dialling and not rotary/pulse  ?

Kevin

Kevin Hawkins wrote:

>Hmm curious - maybe there is a model of the Meteor that does not
support
>DTMF detection for outgoing calls. Is this an older Meteor ?
>
>You could tell via opening a Hyperterminal session at 2400baud 8bits
>noparity 1stop  no flow control to the COM port the Meteor is connected
>too. (quit xAPTel first of course) Now when you lift the tel handset
you
>should see
>
>ON-LINE
>
>and when you dial a digit you should see the digit displayed..
>
>replacing the handset will show OFF-LINE
>
>If you see the first ON-LINE message but not the digits then I'm afraid
>your Meteor is not reporting the outgoing dialled digits
>
>Kevin
>
>slashcomfort wrote:
>
>
>
>>Hi
>>
>>just starting installing xap and have installed the latest xAPTel
>>(intalled the latest beta3) connected to my Meteor (i assume the
mk2
>>as the connectors are not fixed). I all works fine with incoming
>>numbers but doesnt register outgoing. (i can see xap messages from
the
>>unit when making a call but none have the number i've dialed in
them)
>>
>>any ideas? am i doing something wrong?
>>
>>thanks in advance
>>
>>Ade
>>
>>
>>
>>
>>
>>
>>
>>
>>Yahoo! Groups Links
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>
>
>
>
>Yahoo! Groups Links
>
>
>
>
>
>
>
>
>