[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Re: Hardware BSC mapper
I am investigating the possibility of producing a board with just a
single RS232 serial port, power supply and Rabbit chip with Ethernet
that would enable a fairly low cost embedded solution - hopefully coming
in under the Netiom price wise. This would offer the BSC Mapper
functionality and capability for support of one serial device eg the
Meteor for CID perhaps - or HomeVision....
I maybe able to offer pre programmed Rabbit boards that would have no
onboard I/O except Ethernet - but would provide BSC Mapper functionality
+ web server configuration and maybe some basic scheduling if that's of
interest. That I'm guessing would be circa £50 ish - is that in
the
right ballpark do you think ?
Kevin
Andy Laurence wrote:
>
> I seem to remember some people mentioning hardware-based BSC mappers
> in the past. I'm currently configuring xAP Floorplan to switch the
> outputs on my xAP NetIOM based on the results of the inputs. I'd like
> to remove the possible instability of a Windows-based machine that I
> often fiddle with for other uses (although I'm now using Altiris
> Software Virtualisation Suite to isolate dodgy software). Is there
> anything out there that I could use for BSC mapping?
>
xAP_Automation Main Index |
xAP_Automation Thread Index |
xAP_Automation Home |
Archives Home
|