RE: Updates for testing

["Shane Harrison" <shane@xxxxxxxxxxxxxxxxxx>]

Hi James,

Been testing the new release over the last few days.  Not sure what you
expected but the lat/long calculations are still 12 hours out but adjusting
them by 12 hours now works fine so it is meeting my needs at the moment.
The additional "blobs" to indicate state of a link have been
helpful as
well.

Thanks for your continued efforts on the floorplan project - it is a key
component of my HA setup.

Cheers
Shane

-----Original Message-----
From: xap_automation@xxxxxxx
[mailto:xap_automation@xxxxxxx]On
Behalf Of James
Sent: Tuesday, 30 May 2006 12:05 p.m.
To: xap_automation@xxxxxxx
Subject: Re: [xap_automation] Updates for testing


another go!

http://www.mi4.biz/files/testing/updates20060530.zip

I've been running this for quite a few days now with your lat/long
settings and it seems to work as planned.  I have changed how some of
the calculations work so hopefully it should fix it for you. I have also
added to the Links page a second green/red blob that shows if the link
is currently active based on the time criteria set.
Oh, and i've changed the order of things on the main setting page again,
should be more logical now.

James


Shane Harrison wrote:
> But what does work is no adjustment and using sunrise to sunset.
>
> Cheers
> Shane
>
> -----Original Message-----
> From: xap_automation@xxxxxxx
> [mailto:xap_automation@xxxxxxx]On
Behalf Of Shane Harrison
> Sent: Thursday, 25 May 2006 2:50 a.m.
> To: xap_automation@xxxxxxx
> Subject: RE: [xap_automation] Updates for testing
>
>
> Hi James,
>
> Close but no cigar :-)
>
> The adjustment boxes do indeed now adjust the displayed sunrise and
sunset
> time - on the face of it correctly.  However I am now unable to set
any
> "from" "to" active time on the link that works
(except for sunrise to
> sunrise or sunset to sunset).  This holds true for any +/1 12 hours
> adjustment combination on the sunset/sunrise times.
>
> I have noticed that sunrise and sunset times are now swapped around on
the
> settings page compared to the last version.
>
> Cheers
> Shane
>
> P.S  I didn't get up early especially to test it :-)
>
> -----Original Message-----
> From: xap_automation@xxxxxxx
> [mailto:xap_automation@xxxxxxx]On
Behalf Of James
> Sent: Wednesday, 24 May 2006 9:44 a.m.
> To: xap_automation@xxxxxxx
> Subject: Re: [xap_automation] Updates for testing
>
>
> Hi,
>
> 2 out 3 problems down, lets hope this fixes the last:
>
> http://www.mi4.biz/files/testing/updates20060523.zip
>
> I have found the fault where the sunset/rise adjustments were not
taking
> effect. It will still get the original calculation 12 hours out though
> as I can't see where the maths goes wrong but at least with the
> adjustments you should now get a working solution.
>
> Let me know how you get on
>
> James
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>