[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Re: Re: xAP Floorplan 1 released
--------------020407000409060206030707
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
James,
I've spent a lot of time checking this and can't find any bug in 1.0,
which is good news.
Floorplan mimics the DMX channel info within the accuracy of
calculations (if I send
10% and the .event reports 25/255 then floorplan shows 9%, which is fine).
Depending on CPU loading the update can take a few seconds so I guess I
was testing
earlier when it was heavily loaded.
Lehane
James wrote:
>> The way I was checking was with the DMX lights. If they were
>> controlled with floorplan then they were reported
>> correctly but if I used xAPSend then the status didn't get updated
>> until the next .info (ignoring the .event) I'll run
>> some more checks to be sure 100%.
>>
>>
> For info, the sending half of Floorplan is totally separate from the
> receiving half. So controlling a device from floorplan will have no
> effect on the devices status with the display. Only the receipt of the
> .info or .event from the remote device will cause the floorplan
device's
> status to change.
>
> So for debugging this it would be good to get a copy of the .event
> message sent as a result of the Floorplan command and a copy of the
> .event sent as a result of the .cmd sent from xapsend
>
> James
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>
--------------020407000409060206030707
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01
Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1"
http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
James,<br>
I've spent a lot of time checking this and can't find any bug in 1.0,
which is good news.<br>
<br>
Floorplan mimics the DMX channel info within the accuracy of
calculations (if I send<br>
10% and the .event reports 25/255 then floorplan shows 9%, which is
fine).<br>
<br>
Depending on CPU loading the update can take a few seconds so I guess I
was testing<br>
earlier when it was heavily loaded.<br>
<br>
Lehane<br>
<br>
<br>
James wrote:
<blockquote cite="mid4405EFE2.1000904@xxxxxxx"
type="cite">
<blockquote type="cite">
<pre wrap="">The way I was checking was with the DMX
lights. If they were
controlled with floorplan then they were reported
correctly but if I used xAPSend then the status didn't get updated
until the next .info (ignoring the .event) I'll run
some more checks to be sure 100%.
</pre>
</blockquote>
<pre wrap=""><!---->For info, the sending half of
Floorplan is totally separate from the
receiving half. So controlling a device from floorplan will have no
effect on the devices status with the display. Only the receipt of the
.info or .event from the remote device will cause the floorplan device's
status to change.
So for debugging this it would be good to get a copy of the .event
message sent as a result of the Floorplan command and a copy of the
.event sent as a result of the .cmd sent from xapsend
James
xAP_Automation Main Index |
xAP_Automation Thread Index |
xAP_Automation Home |
Archives Home
|