[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Re: Re: Serial Bridge.
--------------030408040103020808010308
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
For a device without any sub devices the UID must end 00 .
so the hbeat should be
xap-hbeat
{
v=12
hop=1
uid=FF000100
class=xap-hbeat.alive
source=Rocket.Bridge.One
interval=60
port=3639
}
If you did have sub devices then the first subdevice would have a uid of
ff000101 and a source of rocket.bridge.one:DeviceA . Even if you did have
sub devices only the master device would send heartbearts and would still
look like the message above.
hth
James
danward79 wrote:
> Hi,
>
> I seem to be having some issues getting the bridge to run properly.
>
> Are all the parameters in unix format? Do I need to specify all of
them?
>
> The heartbeat msg from the bridge, seems to return an error at best,
> and for the rest of my attempts nothing.
>
> The error is as follows
> -----
> Error Message: A xAP message received was malformed. The UID FF000101
> is setup as a subaddress but the Source address is not:
Rocket.Bridge.One
> Received From: 192.168.0.7:2569
>
> xap-hbeat
> {
> v=12
> hop=1
> uid=FF000101
> class=xap-hbeat.alive
> source=Rocket.Bridge.One
> interval=60
> port=3639
> }
> -----
>
> I must be doing something simple wrong here, does anyone have any
> ideas please?
>
> Thanks
>
> Dan
>
>
> --- In xap_automation@xxxxxxx, James <james@...> wrote:
>
>> hi,
>>
>> This is a bit of a guess but:
>> xap-bridge [serial port] [instance name] [network interface] [udp
port]
>> [debug level]
>>
>> and serial port will probably be in the unix format eg /dev/ttyS0
>>
> for com1
>
>> I did notice this though, and this one is really for Patrick:
>> /*
>> $Date: 2003/05/05 14:02:53 $
>> $Revision: 1.1 $
>> $Log: bridge.c,v $
>> Revision 1.1 2003/05/05 14:02:53 cvsowner
>> Very simple serial bridge - only listens on serial port at 9600
>> (fixed), does not modify hop count. Forwards messages on to
ethernet
>> interface without verifying integrity.
>>
>>
>> xAP Serial - Ethernet bridge
>>
>> */
>> which implies a 9600 baud
>>
>> but this
>> newtio.c_cflag = B19200CS8CREADCLOCAL;
>> newtio.c_iflag=IGNBRK IGNPAR IXON IXOFF;
>> newtio.c_lflag=0;
>>
>> newtio.c_cc[VTIME]=0;
>> newtio.c_cc[VMIN]=0;
>>
>> cfsetispeed(&newtio, B19200); // this seems to
be
>> necessary under
>> cfsetospeed(&newtio, B19200); // Cygwin, it
isn't
>> required under Linux
>>
>> would imply a 19200 baud?
>>
>> James
>>
>>
>> danward79 wrote:
>>
>>> Hi,
>>>
>>> I have downloaded Patrick's Serial Bridge. What is the
commandline
>>> format?
>>>
>>> Is it xap-bridge.exe <port>?
>>>
>>> or are there other parameters required?
>>>
>>> I am wanting to play around with some AVR Microprocessors am I
right
>>> in assuming as long as the serial bridge is listening on the
correct
>>> port (6 in my case). I just send a xAP msg over the serial
interface
>>> and the Bridge should handle it ok?
>>>
>>> I am looking at trying to make some simple light level
detector's
>>> using Bascom.
>>>
>>> Any tips?
>>>
>>> Cheers
>>>
>>> Dan
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> Yahoo! Groups Links
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>
--------------030408040103020808010308
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01
Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1"
http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
For a device without any sub devices the UID must end 00 .<br>
so the hbeat should be<br>
<pre wrap="">xap-hbeat
{
v=12
hop=1
uid=FF000100
class=xap-hbeat.alive
source=Rocket.Bridge.One
interval=60
port=3639
}
If you did have sub devices then the first subdevice would have a uid of
ff000101 and a source of rocket.bridge.one:DeviceA . Even if you did have
sub devices only the master device would send heartbearts and would still
look like the message above.
hth
James
</pre>
<br>
danward79 wrote:
<blockquote cite="middv76nt+6ncl@xxxxxxx"
type="cite">
<pre wrap="">Hi,
I seem to be having some issues getting the bridge to run properly.
Are all the parameters in unix format? Do I need to specify all of them?
The heartbeat msg from the bridge, seems to return an error at best,
and for the rest of my attempts nothing.
The error is as follows
-----
Error Message: A xAP message received was malformed. The UID FF000101
is setup as a subaddress but the Source address is not: Rocket.Bridge.One
Received From: 192.168.0.7:2569
xap-hbeat
{
v=12
hop=1
uid=FF000101
class=xap-hbeat.alive
source=Rocket.Bridge.One
interval=60
port=3639
}
-----
I must be doing something simple wrong here, does anyone have any
ideas please?
Thanks
Dan
--- In <a class="moz-txt-link-abbreviated" href="mailto:xap_automation@xxxxxxx";>xap_automation@xxxxxxx</a>,
James <a class="moz-txt-link-rfc2396E" href="mailto:james@...";><james@...></a>
wrote:
</pre>
<blockquote type="cite">
<pre wrap="">hi,
This is a bit of a guess but:
xap-bridge [serial port] [instance name] [network interface] [udp port]
[debug level]
and serial port will probably be in the unix format eg /dev/ttyS0
</pre>
</blockquote>
<pre wrap=""><!---->for com1
</pre>
<blockquote type="cite">
<pre wrap="">I did notice this though, and this one is
really for Patrick:
/*
$Date: 2003/05/05 14:02:53 $
$Revision: 1.1 $
$Log: bridge.c,v $
Revision 1.1 2003/05/05 14:02:53 cvsowner
Very simple serial bridge - only listens on serial port at 9600
(fixed), does not modify hop count. Forwards messages on to ethernet
interface without verifying integrity.
xAP Serial - Ethernet bridge
*/
which implies a 9600 baud
but this
newtio.c_cflag = B19200CS8CREADCLOCAL;
newtio.c_iflag=IGNBRK IGNPAR IXON IXOFF;
newtio.c_lflag=0;
newtio.c_cc[VTIME]=0;
newtio.c_cc[VMIN]=0;
cfsetispeed(&newtio, B19200); // this seems to be
necessary under
cfsetospeed(&newtio, B19200); // Cygwin, it isn't
required under Linux
would imply a 19200 baud?
James
danward79 wrote:
</pre>
<blockquote type="cite">
<pre wrap="">Hi,
I have downloaded Patrick's Serial Bridge. What is the commandline
format?
Is it xap-bridge.exe <port>?
or are there other parameters required?
I am wanting to play around with some AVR Microprocessors am I right
in assuming as long as the serial bridge is listening on the correct
port (6 in my case). I just send a xAP msg over the serial interface
and the Bridge should handle it ok?
I am looking at trying to make some simple light level detector's
using Bascom.
Any tips?
Cheers
Dan
xAP_Automation Main Index |
xAP_Automation Thread Index |
xAP_Automation Home |
Archives Home
|