Re: axc ( Get VAR in Log) ?

["hometecky" <hometecky@xxxxxxxxx>]

--- In xap_automation@xxxxxxx, Gregg Liming <gregg@...> wrote:
>
> Quoting hometecky (2/15/07 10:51 AM):
> > Hello, I am running gregg's updated ver of axc 6.0 and have seen
in
> > my Trixbox Asterisk Logs the following:
> >
> >  Asterisk Full debug log (last 2000 lines)
> >
> > Feb 15 10:45:14 DEBUG[5071] manager.c: Manager received
> > command 'login'
> > Feb 15 10:45:14 DEBUG[5071] acl.c: 0.0.0.0/0.0.0.0/0.0.0.0
appended
> > to acl for peer
> >
> > Is this normal I am wondering if this will fill up the hard drive
> > with this log information?
> > If I shutdown axc these GetVar messages stop.
> > Please let me know if I have something set wrong.
>
> I'm unable to duplicate those messages in the console--which likely
> suggests a difference between trixbox and a "vanilla"
asterisk.
Since I
> don't run trixbox, I can't tell you how to disable those messages.
> Perhaps someone else on this list that runs trixbox can tell you
how to
> make trixbox less verbose.
>
> On a related note, I recently discovered a bug in axc that allowed
> messenger responses (like ones also generated from xAP jabber) to be
> intercepted and processed.  Initially, I was thinking that your get
var
> messages were related (they're not, but...).  So, a recent patch
(v0.6a)
> is now available.  It also does rudimentary conversion of time
stamps to
> make them more "speakable" for TTS.
>
> Gregg
>
Well I wonder if its something in the axc.conf that I have set up
incorrectly?

Let me ask some questions.

1) network_type = VOIP or PSTN or VPSTN
are these just lables that I want to see in Switch Board or do they
actualy do something. I understand what they are abreveating. but
what is the difference between a voice over IP network and a V public
switched telephone network.

2) dialler = None, OFFICE, VPSTN, PSTN
could you explain these options?


3)Dial context = intern Boes this need to match the dial context in
Asterisks extensions, Like from-internal
or this does not matter?

5) set hub = 1 for no xAP HUB running on the Asterisx box? is this
correct?
0= yes there is a HUB running on the Asterisk box?

I have a xAP HUB running on a different computer in the network so I
have mine set to =1 hope I have that right.

here is part of my config may be you will see something
these are the extensions:

[kitchen]
channel			= SIP/400
incoming		= Packet8, vitel, stanaphone, fwd
outgoing		= Packet8,vitel
[loft_office]
channel			= SIP/403
incoming		= vitel
outgoing		= vitel


There are my providers and one Zap that I use for Packet8

[vitel]
incoming_channel	= IAX2/64.2.142.26
outgoing_channel	= IAX2/vitel
country_code		= 1
network_type		= VPSTN
dialler			= PSTN
dial_context		= internal
number_formatter1       = s/1?(\d{10})/$1/

[stanaphone]
incoming_channel	= SIP/08149345
outgoing_channel	= SIP/stanaphone
country_code		= 1
network_type		= VOIP
dialler			= none
dial_context		= internal
number_formatter1       = s/1?(\d{10})/$1/

[fwd]
outgoing_channel	= IAX2/fwd
incoming_channel	= IAX2/fwd
country_code		= 1
network_type		= VPSTN
dialler			= none
dial_context		= internal
number_formatter1       = s/1?(\d{10})/$1/

[Packet8]
# you've no doubt noticed that incomgin_channel doesn't get used;
well it's here in case
# I change my mind
incoming_channel	= Zap/1
# the Zap/<x> syntax applies to x100p devices as well as other
related Digium cards
outgoing_channel	= Zap/1
country_code		= 1
network_type		= PSTN
dialler			= PSTN
dial_context		= internal
number_formatter1       = s/9?1?(\d{10})/$1/


FYI I do get xAP CTI messages and Meteor CID messages.
Just want these messages below to Stop.
every second there is another. Any Ideas would be nice.

Thanks

Feb 16 13:33:58 DEBUG[3174] manager.c: Manager received
command 'GetVar'
Feb 16 13:33:59 DEBUG[3174] manager.c: Manager received
command 'GetVar'
Feb 16 13:34:00 DEBUG[3174] manager.c: Manager received
command 'GetVar'
Feb 16 13:34:02 DEBUG[3174] manager.c: Manager received
command 'GetVar'
Feb 16 13:34:03 DEBUG[3174] manager.c: Manager received
command 'GetVar'
Feb 16 13:34:03 DEBUG[3174] manager.c: Manager received
command 'MailboxCount'
Feb 16 13:34:03 DEBUG[3174] manager.c: Manager received
command 'MailboxCount'
Feb 16 13:34:04 DEBUG[3174] manager.c: Manager received
command 'GetVar'
Feb 16 13:34:05 DEBUG[3174] manager.c: Manager received
command 'GetVar'
Feb 16 13:34:07 DEBUG[3174] manager.c: Manager received
command 'GetVar'
Feb 16 13:34:08 DEBUG[3174] manager.c: Manager received
command 'GetVar'
Feb 16 13:34:09 DEBUG[3174] manager.c: Manager received
command 'GetVar'
Feb 16 13:34:11 DEBUG[3174] manager.c: Manager received
command 'GetVar'
Feb 16 13:34:12 DEBUG[3174] manager.c: Manager received
command 'GetVar'