[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Re: Re: SB Error
--------------020100020805030706020301
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
I'll dive in with a starter for ten.
The key piece of the IVR integration is James's Four software which
allows plain/canned English command and interrogation of the xAP (and
xPL) devices within xAP Floorplan. You need both for the best integration.
Within the ael script (see the xAP wiki) the commands to Four are
embedded, so for example in my script keying '3' gives me the status of
the heating, which is an output on an xAP Netiom, called in Floorplan
'Heating GO', by asking Four 'what is the status of Heating GO'. The
response is then verbalised by the Text To Speech engine - Flite in the
case of Trixbox.
I'm extending that (with the security of a PIN) such that I can command
heating, security, lights, etc.
HTH
Lehane
darrenp_lock wrote:
>
> Greg/James,
>
> would one of you chaps mind summarising this whole thread as a number
> of concepts and integrating technologies have been covered here and
> I'm not sure I've grasped it all :">
>
> I am a TrixBox (PSTN & VoIP) user and have been using AXC to pass
CLID
> info to xAP. I uses SB to provide a CLID database (can't wait to try
> the TrixBox CLID lookup) , user friendly call log and OSD in
> MediaCentre (although there is some work to do here now I'm running
> Vista). I also gateway the SB & AXC (VMail counts & CLID) xAP
Messages
> into HomeSeer and then gateway back out into MainLobby for display on
> my TouchScreen and MainLobby CallerID plugin.
>
> I have been considering processing CLID info in HomeSeer as well as I
> use the HomeSeer interface from my Mobile Phone. Trouble is, this
> would mean keeping a number of CLID Databases all in sync .
>
> Reading between the lines of this thread it would appear that there is
> potential TrixBox IVR integration with xAP but I don't see the
> logic/mechanism to associate an IVR command to some xAP Processing.
>
> Finally, Four and Jabber appeared a couple of times in the thread but
> again I missed their role in this discussion?
>
> Sorry if I am being pain but I sense there is tremendous power in the
> concepts being discussed here and summary would be really appreciated.
>
> Rgds, Darren.
>
> http://www.darrensgarage.com/nodezero
> <http://www.darrensgarage.com/nodezero>
>
>
> --- In xap_automation@xxxxxxx, "Paul Gale"
<groups2@...> wrote:
> >
> > Just noticed SB wasn't working - when I viewed my HA PC I saw the
> following error:
> >
> > Run tim error 3163:
> > The field is too small to accept the amount of data you attempted
to
> add. Try inserting or pasting less data.
> >
> > There was also a xAP Speech error:
> >
> > Run time error 10065
> > No route to host.
> >
> > I've seen the xAP Speech error many times before and it's still
not
> stable.
> >
> > Any ideas?
> >
> > Paul.
> >
>
>
>
------------------------------------------------------------------------
>
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.441 / Virus Database: 268.18.1/690 - Release Date:
16/02/2007 14:25
>
--------------020100020805030706020301
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01
Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1"
http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
I'll dive in with a starter for ten.<br>
<br>
The key piece of the IVR integration is James's Four software which
allows plain/canned English command and interrogation of the xAP (and
xPL) devices within xAP Floorplan. You need both for the best
integration.<br>
<br>
Within the ael script (see the xAP wiki) the commands to Four are
embedded, so for example in my script keying '3' gives me the status of
the heating, which is an output on an xAP Netiom, called in Floorplan
'Heating GO', by asking Four 'what is the status of Heating GO'. The
response is then verbalised by the Text To Speech engine - Flite in the
case of Trixbox.<br>
<br>
I'm extending that (with the security of a PIN) such that I can command
heating, security, lights, etc.<br>
<br>
HTH<br>
Lehane<br>
<br>
<br>
<br>
darrenp_lock wrote:
<blockquote cite="mider6g4o+o2n7@xxxxxxx"
type="cite"><!-- Network content -->
<div id="ygrp-text">
<p>Greg/James,</p>
<p>would one of you chaps mind summarising this whole thread as a
number of concepts and integrating technologies have been covered here
and I'm not sure I've grasped it all <img
moz-do-not-send="true"
alt=":">"
src="http://us.i1.yimg.com/us.yimg.com/i/mesg/tsmileys2/08.gif";
height="18" width="18"></p>
<p>I am a TrixBox (PSTN & VoIP) user and have been using AXC
to
pass CLID info to xAP. I uses SB to provide a CLID database (can't wait
to try the TrixBox CLID lookup) , user friendly call log and OSD in
MediaCentre (although there is some work to do here now I'm running
Vista). I also gateway the SB & AXC (VMail counts &
CLID) xAP
Messages into HomeSeer and then gateway back out into MainLobby for
display on my TouchScreen and MainLobby CallerID plugin.</p>
<p>I have been considering processing CLID info in HomeSeer as well
as I use the HomeSeer interface from my Mobile Phone. Trouble is,
this
would mean keeping a number of CLID Databases all in sync .</p>
<p>Reading between the lines of this thread it would appear that
there is potential TrixBox IVR integration with xAP but I don't see the
logic/mechanism to associate an IVR command to some xAP
Processing.</p>
<p>Finally, Four and Jabber appeared a couple of times in the thread
but again I missed their role in this discussion?</p>
<p>Sorry if I am being pain but I sense there is tremendous power in
the concepts being discussed here and summary would be really
appreciated.</p>
<p>Rgds, Darren.</p>
<p><a href="http://www.darrensgarage.com/nodezero";>http://www.darrensg<wbr>arage.com/<wbr>nodezero</a> </p>
<p><br>
--- In xap_automation@<wbr>yahoogroups.<wbr>com, "Paul
Gale"
<a class="moz-txt-link-rfc2396E" href="mailto:groups2@...";><groups2@...></a>
wrote:<br>
><br>
> Just noticed SB wasn't working - when I viewed my HA PC I saw the
following error:<br>
> <br>
> Run tim error 3163:<br>
> The field is too small to accept the amount of data you attempted
to add. Try inserting or pasting less data.<br>
> <br>
> There was also a xAP Speech error:<br>
> <br>
> Run time error 10065<br>
> No route to host.<br>
> <br>
> I've seen the xAP Speech error many times before and it's still
not stable.<br>
> <br>
> Any ideas?<br>
> <br>
> Paul.<br>
><br>
</p>
</div>
<!--End group email -->
<pre wrap="">
<hr size="4" width="90%">
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.441 / Virus Database: 268.18.1/690 - Release Date: 16/02/2007
14:25
</pre>
</blockquote>
<br>
<span width="1" style="color:
white;"/>__._,_.___</span>
<!-- **begin egp html banner** -->
<img src="http://geo.yahoo.com/serv?s=97476590/grpId=9674343/grpspId=1705007709/msgId=3491/stime=1171715279";
width="1" height="1"> <br>
<!-- **end egp html banner** -->
<!-- **begin egp html banner** -->
<br>
<div style="font-family: verdana; font-size: 77%; border-top: 1px
solid #666; padding: 5px 0;" >
Your email settings: Individual EmailTraditional <br>
<a href="http://groups.yahoo.com/group/xap_automation/join;_ylc=X3oDMTJmYWQyODRwBF9TAzk3NDc2NTkwBGdycElkAzk2NzQzNDMEZ3Jwc3BJZAMxNzA1MDA3NzA5BHNlYwNmdHIEc2xrA3N0bmdzBHN0aW1lAzExNzE3MTUyNzk-";>Change
settings via the Web</a> (Yahoo! ID required) <br>
Change settings via email: <a href="mailto:xap_automation-digest@xxxxxxx?subject=Email
Delivery: Digest">Switch delivery to Daily Digest</a> <a
href = "mailto:xap_automation-fullfeatured@xxxxxxx?subject=Change
Delivery Format: Fully Featured">Switch to Fully Featured</a>
<br>
<a href="http://groups.yahoo.com/group/xap_automation;_ylc=X3oDMTJkMmttOWUzBF9TAzk3NDc2NTkwBGdycElkAzk2NzQzNDMEZ3Jwc3BJZAMxNzA1MDA3NzA5BHNlYwNmdHIEc2xrA2hwZgRzdGltZQMxMTcxNzE1Mjc5";>
Visit Your Group
</a>
<a href="http://docs.yahoo.com/info/terms/";>
Yahoo! Groups Terms of Use
</a>
<a href="mailto:xap_automation-unsubscribe@xxxxxxx?subject=Unsubscribe";>
Unsubscribe
</a>
<br>
</div>
<br>
<!-- **end egp html banner** -->
<span style="color: white;"/>__,_._,___</span>
</body>
</html>
--------------020100020805030706020301--
xAP_Automation Main Index |
xAP_Automation Thread Index |
xAP_Automation Home |
Archives Home
|
![http://us.i1.yimg.com/us.yimg.com/i/mesg/tsmileys2/08.gif"](http://us.i1.yimg.com/us.yimg.com/i/mesg/tsmileys2/08.gif"){kind=link}