RE: HELP! Getting started with CID

["Paul Gale" <groups@xxxxxxxxxxxxxxxx>]

Maybe I just need to persevere with * - would prob be the best
solution.

Paul.


> -----Original Message-----
> From: xap_automation@xxxxxxx
> [mailto:xap_automation@xxxxxxx] On
Behalf Of Kevin Hawkins
> Sent: 17 January 2007 14:39
> To: xap_automation@xxxxxxx
> Subject: Re: [xap_automation] HELP! Getting started with CID
>
> xAPTel sends the usual AT commands to an attached modem to dial and
> these tend to be fairly standard across all modems so just about
> anything should work. The incoming CID enabling and the format that
the
> modem presents the data in varies from manufacturer to manufacturer
(and
> Telco to Telco) which is why that bit is more awkward and not
currently
> included. TAPI is the nice way around this but I haven't managed to
> track down a free TAPI OCX to include in xAPTel.  As so few people
have
> asked it just wasn't appropriate for me to licence one either,
> particularly as I don't use a modem.  I do understand that the * xAP
> conduit integrates well with xAP Switchboard though - when you get it
> running.
>
>     Paul Gale wrote:
> > Kevin,
> >
> > I've always planned on using Asterisk for my outgoing calling
> integration but although the * box has been running here for over a
year,
> I've never got round to getting it properly sorted.
> >
> > In the mean-time, are there any specific modems that work well
with
> outgoing dialling that you know of - or does anything work OK?
> >
> > I'd be using one with a number of DECT phones linked to the line.
> >
> > Cheers,
> >
> > Paul.
> >
> >
> >
> >
>
>
>
>
>
> Yahoo! Groups Links
>
>
>