[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Re: Server Crash
- Subject: Re: Server Crash
- From: "frostie2001uk" <neil@xxxxxxxxxxxxx>
- Date: Wed, 03 Oct 2007 06:48:46 -0000
Hi Keving
HoneyCottage is the website I got the TOM10 software from
http://www.honeycottage.mm-wave.com/tom10.htm
The shuttle is in the lounge running all the xAP stuff
The MSS100 is in the cupboard upstairs connected to the TOM10 board.
It's all connected over my local network, not the internet.
I can see the TOM10 in the message viewer but no temperature
sensors...
This was working when connected locally to the shuttles USB port (It
used a serial to USB converter. Now it's connected to the MSS100
serial port.
HTH
Neil
--- In xap_automation@xxxxxxx, Kevin Hawkins <lists@...>
wrote:
>
> If you use the COM port redirector can you actually see the TOM10 -
> ignoring the xAP conduit fttb ?
>
> You'll have to expand on where HoneyCottage fits into this - is it
> remote to the new Shuttle which I think is where you are running
the xAP
> conduit ?.
>
> Or perhaps you are using redirector over the internet to the TOM10
and
> running the xAP conduit locally in which case I can't see where
the
> Shuttle under the PC comes in ?
>
> xAP will not route over the internet unless you use xRouter - from
mi4.
>
> Kevin
>
> frostie2001uk wrote:
> > Hi
> >
> > The HDD on my server has died :( I managed to get a lot of the
data
> > of so that's ok. I've managed to convince SWMBO to let me have
the
> > server in the lounge under the TV (its a shuttle-esk box so
looks
> > ok).
> >
> > Trouble is I'm using a TOM10 which is in the airing cupboard.
I've
> > put an MSS100 on the end of it and bodged the USB power to the
TOM10
> > using an NSLU2 for now...
> >
> > I can get the power led on the TOM10 on. I can using the com
port
> > redirector to show up on the server and connect. I'm using the
xap
> > plugin runtime for the TOM10 from here honey cottage.
> >
> > Trouble is I'm not seeing any temperatures.
> >
> > In the message viewer I can see MMWAVE.TOM10.Cornelius but no
> > temperatures...
> >
> > Does anyone have any ideas?
> >
> > Thanks
> > Neil
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
>
xAP_Automation Main Index |
xAP_Automation Thread Index |
xAP_Automation Home |
Archives Home
|