[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Barionet & Xap
- Subject: Barionet & Xap
- From: "andrevdm" <andrevdm@xxxxxxxxx>
- Date: Wed, 09 Jul 2008 21:55:17 -0000
Dear Kevin,
I now have the barionet running with one IO12, one R6 expansion
modules, and several 1-wire sensors. The IO12 and R6 modules are
connected through the RS485 interface.
My input addresses now extends to 712. The xAP BSC scheme allows subUID
up to HEX FF only for each UID.
Should i then rather create a UID per input and output, each with
subIUD 00 ?
ie input 701 is now FF.0701:00
alternatively i should have an UID for each device on the RS485
network, each with its set of subUID's for each port. This will require
some translation inside the BCL program in the barionet.
any thoughts ?
------------------------------------
xAP_Automation Main Index |
xAP_Automation Thread Index |
xAP_Automation Home |
Archives Home
|