Re: Re: HA7net

[Martyn Wendon <martynwendon@xxxxxxxxxxx>]

--0-1616599184-1255387931=:18066
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: quoted-printable

Thanks for all the replies,

Currently I have 4 of the Quasar temp boards connected to a PC - I really
w=
ant to move away from PC connected devices and have something
stand-alone..=
..

I have to admit that I do like the spec of the opnone with it having xAP
bu=
ilt in, but it's a bit costly (likewise the Barionet).=A0 At just on
=A3100=
the HA7net seems pretty reasonable!

It seems that there's a perl module available to talk to it too so
shouldn'=
t be too difficult to whip something up to poll it.....

Martyn

--- On Mon, 10/12/09, erspearson <edward.mailgroup@xxxxxxx> wrote:

From: erspearson <edward.mailgroup@xxxxxxx>
Subject: [xap_automation] Re: HA7net
To: xap_automation@xxxxxxx
Date: Monday, October 12, 2009, 7:51 PM

And of course there's the Barionet - but not very cost effective if you
onl=
y want 1-wire.

--- In xap_automation@xxxxxxx, Kevin Hawkins <yahoogroupskh@...> wr=
ote:
>
> Apologies for the flurry of responses - I knew I'd remembered some
other=
=20
> attractively priced device with xAP embedded and 1-wire. (=A385)
>=20
> It's the LiveBox Home Automation Hub project but I am not sure how=20
> extensive the 1-wire side is. It might just handle eight
temperature=20
> sensors.=A0 Give Brett a shout..
>=20
> http://livebox.dbzoo.com/index.html
>=20
> Also if you own any existing HA app that has plugin support for the=20
> HA7net and xAP=A0 then that should work but it's probably a bit
circuitou=
s=20
> for your purposes.
>=20
> K
>=20
> Kevin Hawkins wrote:
> >=A0=20
> >
> > Forgot to mention the excellent 'LogTemp' app that has
implemented xAP
> > using the Telemetry schema (TSC).
> >
> > http://www.mrsoft.fi/ohj01en.htm
<http://www.mrsoft.fi/ohj01en.htm>
> >
> > K
> >
> > Kevin Hawkins wrote:
> > >
> > >
> > > There's the mcs 1-wire app at
> > > http://www.mcssprinklers.com/xapXap.htm=20
> > <http://www.mcssprinklers.com/xapXap.htm>
> > > <http://www.mcssprinklers.com/xapXap.htm=20
> > <http://www.mcssprinklers.com/xapXap.htm>>
> > > Supports the DS9097U or DS9490 interface
> > >
> > > Also this is in the recent release notes for v0.9.0 mSure
> > > http://www.msure.se/ <http://www.msure.se/> <http://www.msure.se/=20
> > <http://www.msure.se/>>
> > > "Example xAPTemperatureReporter.cs removed from
installation kit as x=
AP
> > > will be implemented more tightly with MSure. "
> > >
> > > Patrick Glasson has been developing a 1-wire app too.
> > >
> > > Not aware of a 1-wire app with HA7Net support but could be
wrong.
> > >
> > > The OPNone is very good ;-)
> > > link for others..
> > > http://sites.google.com/a/usapiens.com/opnode/products=20
> > <http://sites.google.com/a/usapiens.com/opnode/products>
> > > <http://sites.google.com/a/usapiens.com/opnode/products=20
> > <http://sites.google.com/a/usapiens.com/opnode/products>>
> > >
> > > K
> > >
> > > Martyn Wendon wrote:
> > > >
> > > >
> > > > Anybody know if the HA7net 1wire network device
supports xAP (or=20
> > xPL) in
> > > > firmware? Failing that is there a xAP connector for it?
> > > >
> > > > I did look at the opn-one as it IS a xAP device, but
it's over=20
> > twice the
> > > > cost, which I can't stretch to at the moment!
> > > >
> > > > Thanks,
> > > >
> > > > Martyn
> > > >
> > > >
> > >
> > >
> >
> >
>




------------------------------------