[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Re: {Disarmed} Re: Min Touch Screen module
--001636025daeec2265047455d8c8
Content-Type: text/plain; charset=windows-1252
Content-Transfer-Encoding: quoted-printable
Oops, yes I did mean the 5600W, with the mini-PCI edge connector - which
sadly doesn't seem to have made it into the Eagle CAD library yet!
Patrick
2009/9/21 Dave McLaughlin <dave@xxxxxxx>
>
>
> Hi Patrick
>
>
>
> I have also found out about a newer 3.4=94 display coming from a
German
> company that will be colour with touch so I am looking at that for the
> future too. I think it has the micro on it but I believe there will be
an
> SPI option coming out too. Once I know this is commercial, I=92ll post
it
> here. This looks like it could be a nice little HA project device. My
des=
ign
> is for cheap and cheerful and I can install as many as I need.
>
>
>
> As for the ADS7846, both TI and Analog Devices do a device that
appears t=
o
> be compatible with each other. Here is the TI link.
>
>
>
> http://focus.ti.com/docs/prod/folders/print/ads7846.html
>
>
>
> The display I am using is 8 bit parallel data with 2 chip selects. You
ca=
n
> hook this up to the Rabbit quite easily if you enable the external
data
> bus. I have the RCM5450W here which is a bigger version of the one
you
> have. I have a foot print in my CAD system for the RCM5600W series,
the m=
ini
> PCI ones. I assume you mean you have the RCM5600W?
>
>
>
> I like your idea for the Perspex as I can get some very nice Perspex
pane=
ls
> made up from Front Panel Express and they look great. I think I might
mak=
e
> up something for these displays now that you have shown a good idea
for
> making them solid looking.
>
>
>
> Regards
>
> Dave...
>
> ---
> Very funny Scotty, now beam down my clothes!!!
> ---
> http://www.embeddedcomputer.co.uk
> ---
>
>
>
> *From:* xap_automation@xxxxxxx [mailto:
> xap_automation@xxxxxxx] *On Behalf Of *Patrick Lidstone
> *Sent:* 21 September 2009 16:00
> *To:* xap_automation@xxxxxxx
> *Subject:* {Disarmed} Re: [xap_automation] Min Touch Screen module
>
>
>
>
>
> Hi Dave,
> This looks very nice! I've been playing with something similar - but
with=
a
> slightly bigger screen, and without touch (I am going with capacitive
> sensors around edge of screen bezel), based on the newish rabbit micos
wi=
fi
> controllers (RC5500W) - I had a quick scout for a datasheet on the
ADS748=
6,
> but drew a blank - any pointers? I'm guessing there isn't scope in
your
> design for a half populated (processor-less) board exposing an SPI
interf=
ace
> to the display?
>
> PS. Re. perspex front panels - if you paint clear perspex from behind
wit=
h
> aerosol paint, you get a really nice professional looking finish
"through=
"
> the perspex.
> Cheers
> Patrick
>
>
>=20
--001636025daeec2265047455d8c8
Content-Type: text/html; charset=windows-1252
Content-Transfer-Encoding: quoted-printable
<head>
<style type=3D"text/css">
<!--
/* start of attachment style */
.ygrp-photo-title{
clear: both;
font-size: smaller;
height: 15px;
overflow: hidden;
text-align: center;
width: 75px;
}
div.ygrp-photo{
background-position: center;
background-repeat: no-repeat;
background-color: white;
border: 1px solid black;
height: 62px;
width: 62px;
}
div.photo-title=20
a,
div.photo-title a:active,
div.photo-title a:hover,
div.photo-title a:visited {
text-decoration: none;=20
}
div.attach-table div.attach-row {
clear: both;
}
div.attach-table div.attach-row div {
float: left;
/* margin: 2px;*/
}
p {
clear: both;
padding: 15px 0 3px 0;
overflow: hidden;
}
div.ygrp-file {
width: 30px;
valign: middle;
}
div.attach-table div.attach-row div div a {
text-decoration: none;
}
div.attach-table div.attach-row div div span {
font-weight: normal;
}
div.ygrp-file-title {
font-weight: bold;
}
/* end of attachment style */
-->
</style>
</head>
<html><head>
<style type=3D"text/css">
<!--
#ygrp-mkp{
border: 1px solid #d8d8d8;
font-family: Arial;
margin: 14px 0px;
padding: 0px 14px;
}
#ygrp-mkp hr{
border: 1px solid #d8d8d8;
}
#ygrp-mkp #hd{
color: #628c2a;
font-size: 85%;
font-weight: bold;
line-height: 122%;
margin: 10px 0px;
}
#ygrp-mkp #ads{
margin-bottom: 10px;
}
#ygrp-mkp .ad{
padding: 0 0;
}
#ygrp-mkp .ad a{
color: #0000ff;
text-decoration: none;
}
-->
</style>
</head>
<body>
<!-- **begin egp html banner** -->
<br><br>
<!-- **end egp html banner** -->
Oops, yes I did mean the 5600W, with the mini-PCI edge connector - which
sa=
dly doesn't seem to have made it into the Eagle CAD library
yet!<br><br=
>Patrick<br><br><div
class=3D"gmail_quote">2009/9/21 Dave McLaughlin <span =
dir=3D"ltr"><<a href=3D"mailto:dave@xxxxxxx";>dave@embedde=
dcomputer.co.uk</a>></span><br>
<blockquote class=3D"gmail_quote" style=3D"border-left:
1px solid rgb(204, =
204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
=20=20=20=20=20=20=20=20
<div bgcolor=3D"white" link=3D"blue"
vlink=3D"purple" lang=3D"EN-GB">
<br><br>
<div>
<p><span style=3D"font-size: 11pt; color: rgb(31, 73,
125);">Hi Patrick</sp=
an></p>
<p><span style=3D"font-size: 11pt; color: rgb(31, 73,
125);">=A0</span></p>
<p><span style=3D"font-size: 11pt; color: rgb(31, 73,
125);">I have also fo=
und out about a newer 3.4=94 display coming
from a German company that will be colour with touch so I am looking at
tha=
t
for the future too. I think it has the micro on it but I believe there
will=
be
an SPI option coming out too. Once I know this is commercial, I=92ll post
it here. This looks like it could be a nice little HA project device. My
de=
sign
is for cheap and cheerful and I can install as many as I
need.</span></p>
<p><span style=3D"font-size: 11pt; color: rgb(31, 73,
125);">=A0</span></p>
<p><span style=3D"font-size: 11pt; color: rgb(31, 73,
125);">As for the ADS=
7846, both TI and Analog Devices do a device that appears
to be compatible with each other. Here is the TI
link.</span></p>
<p><span style=3D"font-size: 11pt; color: rgb(31, 73,
125);">=A0</span></p>
<p><span style=3D"font-size: 11pt; color: rgb(31, 73,
125);"><a href=3D"htt=
p://focus.ti.com/docs/prod/folders/print/ads7846.html"
target=3D"_blank">ht=
tp://focus.ti.com/docs/prod/folders/print/ads7846.html</a></span></p>
<p><span style=3D"font-size: 11pt; color: rgb(31, 73,
125);">=A0</span></p>
<p><span style=3D"font-size: 11pt; color: rgb(31, 73,
125);">The display I =
am using is 8 bit parallel data with 2 chip
selects. You can hook this up to the Rabbit quite easily if you enable the
external data bus.=A0 I have the RCM5450W here which is a bigger version of
the one you have. I have a foot print in my CAD system for the RCM5600W
ser=
ies,
the mini PCI ones. I assume you mean you have the
RCM5600W?</span></p>
<p><span style=3D"font-size: 11pt; color: rgb(31, 73,
125);">=A0</span></p>
<p><span style=3D"font-size: 11pt; color: rgb(31, 73,
125);">I like your id=
ea for the Perspex as I can get some very nice Perspex
panels made up from Front Panel Express and they look great. I think I
migh=
t
make up something for these displays now that you have shown a good idea
fo=
r
making them solid looking.</span></p>
<p><span style=3D"font-size: 11pt; color: rgb(31, 73,
125);">=A0</span></p>
<p><span style=3D"font-size: 11pt; color: rgb(31, 73,
125);">Regards</span>=
</p>
<div>
<p><span style=3D"font-size: 10pt; color: rgb(31, 73,
125);">Dave...</span>=
</p>
<p><span style=3D"font-size: 10pt; color: rgb(31, 73,
125);">---<br>
Very funny Scotty, now beam down my clothes!!!<br>
---<br>
<a href=3D"http://www.embeddedcomputer.co.uk";
target=3D"_blank">http://www.=
embeddedcomputer.co.uk</a><br>
---</span><span style=3D"font-size: 11pt; color: rgb(31, 73,
125);"></span>=
</p>
</div>
<p><span style=3D"font-size: 11pt; color: rgb(31, 73,
125);">=A0</span></p>
<div>
<div style=3D"border-style: solid none none; border-color: rgb(181,
196, 22=
3) -moz-use-text-color -moz-use-text-color; border-width: 1pt medium
medium=
; padding: 3pt 0cm 0cm;">
<p><b><span style=3D"font-size: 10pt;"
lang=3D"EN-US">From:</span></b><span=
style=3D"font-size: 10pt;" lang=3D"EN-US"> <a
href=3D"mailto:xap_automatio=
n@xxxxxxx"
target=3D"_blank">xap_automation@xxxxxxx</a>
[mailto:<a href=3D"mailto:xap_automation@xxxxxxx";
target=3D"_blank"=
>xap_automation@xxxxxxx</a>] <b>On Behalf Of
</b>Patrick Lidstone<b=
r>
<b>Sent:</b> 21 September 2009 16:00<br>
<b>To:</b> <a href=3D"mailto:xap_automation@xxxxxxx";
target=3D"_bla=
nk">xap_automation@xxxxxxx</a><br>
<b>Subject:</b> {Disarmed} Re: [xap_automation] Min Touch
Screen module</sp=
an></p>
</div>
</div>
<p>=A0</p>
<p>=A0 </p>
<div>
<div>
<div>
<p style=3D"margin-bottom: 12pt;">Hi Dave,<br>
This looks very nice! I've been playing with something similar -
but wi=
th a
slightly bigger screen, and without touch (I am going with capacitive
senso=
rs
around edge of screen bezel), based on the newish rabbit micos wifi
control=
lers
(RC5500W) - I had a quick scout for a datasheet on the ADS7486, but drew a
blank - any pointers? I'm guessing there isn't scope in
your design=
for a half
populated (processor-less) board exposing an SPI interface to the
display?<=
br>
<br>
PS. Re. perspex front panels - if you paint clear perspex from behind with
aerosol paint, you get a really nice professional looking finish
"through" the perspex.<br>
Cheers<br>
Patrick</p>
</div>
</div>
</div>
</div>
<br>
=20=20=20=20
=20=20=20=20
<br>
<div width=3D"1" style=3D"color: white; clear:
both;"></div>
</blockquote></div><br>
<!-- **begin egp html banner** -->
<br>
=20=20=20=20
=20=20=20=20
<br>
<!-- **end egp html banner** -->
<div width=3D"1" style=3D"color: white; clear:
both;"/>__._,_.___</div>
<!-- Start Recommendations -->
<!-- End Recommendations -->
<!-- **begin egp html banner** -->
<img src=3D"http://geo.yahoo.com/serv?s=3D97476590/grpId=3D9674343/grpspI=
d=3D1705007709/msgId=3D4499/stime=3D1253812019" width=3D"1"
height=3D"1"> <=
br>
<!-- **end egp html banner** -->
=20=20
<!-- **begin egp html banner** -->
<br>
<div style=3D"font-family: verdana; font-size: 77%; border-top: 1px
s=
olid #666; padding: 5px 0;" >
Your email settings: Individual EmailTraditional <br>
<a href=3D"http://groups.yahoo.com/group/xap_automation/join;_ylc=3DX=
3oDMTJmYTdqMTBsBF9TAzk3NDc2NTkwBGdycElkAzk2NzQzNDMEZ3Jwc3BJZAMxNzA1MDA3NzA5=
BHNlYwNmdHIEc2xrA3N0bmdzBHN0aW1lAzEyNTM4MTIwMTk-">Change settings
via the W=
eb</a> (Yahoo! ID required) <br>
Change settings via email: <a href=3D"mailto:xap_automation-digest@ya=
hoogroups.com?subject=3DEmail Delivery: Digest">Switch delivery to
Daily Di=
gest</a> <a href =3D "mailto:xap_automation-fullfeatured@xxxxxxx?=
subject=3DChange Delivery Format: Fully Featured">Switch to Fully
Featured<=
/a> <br>
<a href=3D"http://groups.yahoo.com/group/xap_automation;_ylc=3DX=
3oDMTJkZGNrMXVzBF9TAzk3NDc2NTkwBGdycElkAzk2NzQzNDMEZ3Jwc3BJZAMxNzA1MDA3NzA5=
BHNlYwNmdHIEc2xrA2hwZgRzdGltZQMxMjUzODEyMDE5">
Visit Your Group=20
</a>
<a href=3D"http://docs.yahoo.com/info/terms/";>
Yahoo! Groups Terms of Use
</a>
<a href=3D"mailto:xap_automation-unsubscribe@xxxxxxx?subject=
=3DUnsubscribe">
Unsubscribe=20
</a>=20
<br>
</div>
<br>
<!-- **end egp html banner** -->
<div style=3D"color: white; clear:
both;"/>__,_._,___</div>
</body>
</html>
--001636025daeec2265047455d8c8--
xAP_Automation Main Index |
xAP_Automation Thread Index |
xAP_Automation Home |
Archives Home
|